2014년 1월 15일 수요일

Juniper 인증 JN0-730 덤프

일반적으로Juniper인증시험은 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들이니. 마침 우리ITExamDump 의 문제와 답들은 모두 이러한 과정을 걸쳐서 만들어진 아주 완벽한 시험대비문제집들입니다. 우리의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%보장 도를 자랑하며 만약 우리ITExamDump의 제품을 구매하였다면Juniper관련 시험패스와 자격증취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.

ITExamDump의 Juniper인증 JN0-730시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Juniper인증 JN0-730덤프가 신뢰성을 다시 한번 인증해주는것입니다. Juniper인증 JN0-730시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Juniper인증 JN0-730덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Juniper인증JN0-730시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며JN0-730시험은 한번에 패스할 수 있는 덤프입니다.

시험 번호/코드: JN0-730
시험 이름: Juniper (DX, Specialist (JNCIS-DX))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 270 문항
업데이트: 2014-01-14

Juniper 인증 JN0-730시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 Juniper 인증 JN0-730덤프는Juniper 인증 JN0-730시험을 쉽게 만듭니다.

JN0-730 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-730.html

NO.1 Using the CLI, if the startup copy of the ScreenOS on a NS-204 is corrupted, from which two (2)
alternate locations can an image be loaded?
A. ROM
B. TFTP server
C. Internal Flash
D. PCMCIA Card
E. Compact Flash Card
Answer: B,E

Juniper   JN0-730 dumps   JN0-730   JN0-730 dumps   JN0-730최신덤프

NO.2 What is the initial default username and password for all ScreenOS devices?
A. administrator/password
B. root/password
C. netscreen/netscreen
D. admin/netscreen1
Answer: D

Juniper pdf   JN0-730   JN0-730   JN0-730   JN0-730덤프

NO.3 Which two devices run ScreenOS software? (Choose two.)
A. NetScreen-5200
B. NetScreen-5400
C. SRX240
D. MX480
Answer: C,D

Juniper자료   JN0-730 pdf   JN0-730 pdf

NO.4 In the packet forwarding decision process, how is the second packet handled differently than
the first in a series of allowed interzone packets?
A. The second packet causes an ARP query.
B. The second packet is checked against the policy table.
C. The second packet is forwarded without a sanity check.
D. The second packet is forwarded without checking the route table.
Answer: D

Juniper pdf   JN0-730최신덤프   JN0-730   JN0-730 dumps

NO.5 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. NVRAM
B. TFTP server
C. internal flash
D. PCMCIA card
Answer: C

Juniper   JN0-730기출문제   JN0-730시험문제   JN0-730   JN0-730

NO.6 Using the CLI, if the startup copy of the ScreenOS is corrupted, from which location can an
image be loaded?
A. TFTP server
B. internal flash
C. PCMCIA card
D. Compact Flash Card
Answer: A

Juniper자격증   JN0-730   JN0-730   JN0-730인증

NO.7 Which security feature provides secure tunnels across a public network?
A. dynamic routing
B. Web filtering
C. IPsec
D. firewall filters
Answer: A

Juniper   JN0-730   JN0-730   JN0-730

NO.8 What is a zone used for?
A. to bundle interfaces together for redundancy
B. to bundle interfaces sharing identical security requirements
C. to provide a tunneled connection across a network
D. to protect against spam attacks
Answer: D

Juniper   JN0-730 dump   JN0-730   JN0-730   JN0-730 dumps

NO.9 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A. ROM
B. NVRAM
C. TFTP server
D. Internal Flash
E. PCMCIA Card
Answer: D

Juniper pdf   JN0-730최신덤프   JN0-730최신덤프   JN0-730인증   JN0-730   JN0-730

NO.10 When a firewall receives the first packet in a series, what will it immediately do?
A. Check its route table.
B. Check its session table.
C. Determine if traffic is crossing zones.
D. Verify that it is not malformed or a fragment.
Answer: D

Juniper   JN0-730인증   JN0-730

NO.11 A ScreenOS firewall has one interface in the user zone and one interface in the servers zone.
Both interfaces are addressed and active.
The configured policy allows user traffic from the user zone to the FTP server in the servers zone,
but the traffic does not cross the firewall from the client to the server.
What is the most likely problem with the firewall?
A. The ScreenOS firewall has no physical connection to the FTP server.
B. The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C. The ScreenOS firewall does not have a route defined to the FTP server's subnet.
D. The ScreenOS firewall does not have a route defined to the FTP client's subnet.
Answer: C

Juniper덤프   JN0-730   JN0-730기출문제

NO.12 When is NAT used?
A. for Layer 2 switching
B. for MPLS VPNs
C. to translate between IP addresses
D. for secure tunnels
Answer: B

Juniper시험문제   JN0-730   JN0-730   JN0-730최신덤프   JN0-730

NO.13 In the flow decision process, the system has found a route entry matching the packet
destination IP .
Which pair will identify the policy that is applied to this packet?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper   JN0-730자료   JN0-730   JN0-730 dumps   JN0-730자격증

NO.14 Which operating system is used on a NetScreen device?
A. IOS
B. Junos
C. FreeBSD
D. ScreenOS
Answer: A

Juniper   JN0-730 dumps   JN0-730

NO.15 In the packet flow decision process, which pair identifies interzone traffic?
A. source and destination MAC
B. source and destination interface
C. source and destination TCP port
D. source and destination IP address
Answer: B

Juniper   JN0-730   JN0-730인증   JN0-730

ITexamdump의 70-463덤프의 VCE테스트프로그램과 HP0-J62덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 9L0-010시험에 대비한 고품질 덤프와 HP2-B25시험 최신버전덤프를 제공해드립니다. 최고품질 70-492시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-730.html

댓글 없음:

댓글 쓰기