Citrix 인증1Y0-A26인증시험공부자료는ITExamDump에서 제공해드리는Citrix 인증1Y0-A26덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.
ITExamDump에서 제공해드리는 Citrix인증 1Y0-A26덤프는 가장 출중한Citrix인증 1Y0-A26시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. Citrix인증 1Y0-A26덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?
IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게 간단하게 시험을 패스할것인가 입니다. ITExamDump는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. ITExamDump의Citrix 인증1Y0-A26시험대비 덤프로Citrix 인증1Y0-A26시험을 패스하세요.
ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Citrix인증1Y0-A26시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이Citrix인증1Y0-A26시험에 대한 부담은 사라질 것입니다.
ITExamDump는 IT인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.
시험 번호/코드: 1Y0-A26
시험 이름: Citrix (Citrix XenServer 6.0 Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-01-23
1Y0-A26 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-A26.html
NO.1 An administrator needs to export a virtual machine to an NFS share mounted on a XenServer host.
Which xe CLI command does the administrator need to execute from a remote machine to perform the
virtual machine export?
A. xe vm-export -h <hostname> filename=<pathname_of_file>
B. xe vm-export -h <hostname> -u <root> -pw <password> vm=<vm_name>
C. xe vm-export -h <hostname> -u <root> -pw <password> filename=<pathname_of_file>
D. xe vm-export -h <hostname> -u <root> -pw <password> vm=<vm_name>
filename=<pathname_of_file>
Answer: D
Citrix 1Y0-A26 dumps 1Y0-A26 1Y0-A26
NO.2 When starting up a XenServer from SAN, the BIOS of the ___________ contains the instructions that
enable the host to find the boot disk. (Choose the correct option to complete the sentence.)
A. host machine
B. array controller
C. host bus adapter
D. network interface card
Answer: C
Citrix 1Y0-A26시험문제 1Y0-A26 1Y0-A26
NO.3 An administrator cloned a template into a virtual machine and then converted it back into a template.
Which action must be performed on the disks to restore expected levels of disk performance?
A. Run SysPrep
B. Complete a full copy
C. Execute a fast clone
D. Suspend before cloning
Answer: B
Citrix인증 1Y0-A26인증 1Y0-A26 1Y0-A26자격증 1Y0-A26
NO.4 Scenario: An administrator is moving a XenServer host from the New York datacenter to the London
datacenter. During the installation of XenServer, the default NTP settings were selected. How must the
administrator ensure that the XenServer host has the correct time settings?
A. Configure the time in the host BIOS.
B. Configure the time zone in the ntp.conf file.
C. Change the time zone using the xsconsole.
D. Change the NTP servers to the London NTP servers.
Answer: C
Citrix시험문제 1Y0-A26최신덤프 1Y0-A26 dumps 1Y0-A26
NO.5 An administrator was given new security rules and now needs to remove specific permissions from the
users in the VM Admin Role Based Access Control group. How can the administrator remove the specific
permissions from the VM Admin user group?
A. Reset the VM Admin user group back to the default permissions.
B. Delete the registry key that applies to the specific permissions that need to be removed.
C. Run the xe subject-role-remove uuid=<subject UUID> role-name=vm.pool_migrate XenServer
command.
D. Remove the specific permissions from the Active Directory user group associated with the VM Admin
user group.
Answer: C
Citrix 1Y0-A26 dumps 1Y0-A26 1Y0-A26 1Y0-A26 pdf 1Y0-A26
NO.6 Scenario: In an environment with high availability enabled, an administrator discovered that a host is
unreachable in a XenServer pool. The administrator disabled high availability in order to make the host
reachable. Which xe CLI command can the administrator run to make the host reachable again?
A. host-disable
B. host-evacuate
C. pool-designate-new-master
D. pool-emergency-reset-master
Answer: D
Citrix dumps 1Y0-A26 1Y0-A26덤프 1Y0-A26
NO.7 Scenario: An administrator configured XenServer Role Based Access Control (RBAC) to authenticate
using Active Directory. Using RBAC, the administrator must grant Level 2 Support users with permission
to start and stop virtual machines. Which two steps must the administrator take to grant Level 2 Support
users virtual machine permissions? (Choose two.)
A. Assign a role to the subject.
B. Add an Active Directory group to the pool.
C. Assign XenServer permissions to a group.
D. Add users and their roles to the authorized list of users.
Answer: AB
Citrix 1Y0-A26 dump 1Y0-A26자료 1Y0-A26자격증
NO.8 Scenario: An administrator is unable to connect to a resource pool in a XenServer environment in
which high availability is enabled. The administrator discovers that the host is unreachable. What does
the administrator need to do to recover the host?
A. Run the pool-disable command, then the host-shutdown command and then restart the host.
B. Run the pool-disable command, then run the pool-emergency-reset-master command and restart the
host.
C. Run the emergency-ha-disable command, then once the host is restarted, run the pool-ha-enable
command.
D. Run the host-evacuate command, then restart the host and run the pool-emergency-transition-to-
master command.
Answer: C
Citrix 1Y0-A26기출문제 1Y0-A26
NO.9 Scenario: To improve performance and increase security, a network team will be moving all XenServer
hosts into a more secure, and high resiliency subnet. The administrator must now change the subnet
mask on all XenServer hosts to match the new network: 172.16.0.0/16. Which command will the
administrator need to execute on each host?
A. xe pif-reconfigure-ip uuid= mode=dhcp netmask=255.255.0.0
B. xe pif-reconfigure-ip uuid= mode=static netmask=255.255.0.0
C. xe pif-reconfigure-ip uuid= mode=dhcp netmask=172.16.0.0/16
D. xe pif-reconfigure-ip uuid= mode=static netmask=172.16.0.0/16
Answer: B
Citrix 1Y0-A26자격증 1Y0-A26인증 1Y0-A26 1Y0-A26
NO.10 An administrator is setting up the XenServer hosts in an environment to boot from SAN. In which BIOS
would the administrator go to enable XenServer to boot from SAN.?
A. Host
B. Array controller
C. Network interface card
D. Primary host bus adapter
Answer: D
Citrix최신덤프 1Y0-A26기출문제 1Y0-A26 dumps 1Y0-A26 1Y0-A26 pdf 1Y0-A26
NO.11 Scenario: An administrator is planning to introduce 100 new virtual machines into the environment.
The administrator plans to use XenServer templates and duplication mechanisms. What must the
administrator consider when deciding between the full copy and fast clone duplication mechanisms?
A. A template needs to be copied before it can be fast cloned.
B. A virtual machine that is duplicated using the full copy method may impact disk performance.
C. A virtual machine that is duplicated using the fast cloned method may impact disk performance.
D. A template created on local storage can be duplicated by using the full copy method by any host in the
pool.
Answer: C
Citrix 1Y0-A26 1Y0-A26 dumps
NO.12 What must be true in order to integrate Active Directory authentication with a XenServer host?
A. LDAP port 389 is open for inbound traffic to the XenServer host.
B. The Active Directory administrator account is created locally on the XenServer host.
C. The same DNS server is used for both the Active Directory server and the XenServer host.
D. RAS authentication is used for communication between the Active Directory server and the XenServer
host.
Answer: C
Citrix시험문제 1Y0-A26 1Y0-A26최신덤프 1Y0-A26인증 1Y0-A26 1Y0-A26
NO.13 An administrator needs to apply an update to a XenServer pool, but needs to control the update path
and the virtual machine migration. What does the administrator need to do to achieve this?
A. Update all hosts in the pool using the xe CLI.
B. Use the Install Update wizard to update the pool.
C. Update each host individually starting with the pool master.
D. Select manual update mode when updating the pool in XenCenter.
Answer: C
Citrix자료 1Y0-A26 dump 1Y0-A26 pdf 1Y0-A26
NO.14 Scenario: An administrator is planning to upgrade the RAM in a XenServer host. Due to business
restrictions, the host must be shut down during normal business hours. High availability is enabled in the
XenServer resource pool. Which step does the administrator need to take before shutting down the
XenServer host to allow the virtual machines to run after the host is shut down?
A. Disable high availability.
B. Export the virtual machines.
C. Place the host in maintenance mode.
D. Copy the virtual machines to another host.
Answer: C
Citrix최신덤프 1Y0-A26 1Y0-A26 1Y0-A26자료 1Y0-A26
NO.15 Scenario: An administrator notices a duplex mismatch on the network interface card (NIC) which is
configured as the management interface. The administrator realizes that the switch was set to 100 full,
but XenServer auto-configured the NIC to 100 half, autoneg=on. How can the administrator ensure the
XenServer host does NOT auto-configure the NIC in the future?
A. Change the NIC properties in the xsconsole.
B. Use the xe pif-configure-ip command to disable auto-configuration.
C. Use the xe pif-param-set command to set other-config:ethtool-autoneg=off.
D. Assign a new NIC to the management interface within the XenCenter Network tab.
Answer: C
Citrix자료 1Y0-A26자격증 1Y0-A26덤프 1Y0-A26 1Y0-A26최신덤프
NO.16 An administrator needs to run commands to specify __________ to configure email alerts at the host
level. (Choose the correct option to complete the sentence.)
A. alarm_priority on the host
B. alarm_priority on the virtual machine
C. the sender email address and SMTP server
D. the recipient email address and SMTP server
Answer: D
Citrix 1Y0-A26시험문제 1Y0-A26 1Y0-A26
NO.17 Scenario: An administrator needs to upgrade the memory of a XenServer host. Business requirements
state that this task can only be done during business hours. Which two steps must the administrator take
before shutting down a XenServer host in an environment that has high availability enabled without
affecting performance? (Choose two.)
A. Disable the host.
B. Evacuate the host.
C. Reset the pool master.
D. Disable high availability.
Answer: AB
Citrix 1Y0-A26 1Y0-A26 1Y0-A26덤프
NO.18 Scenario: An administrator is adding a new host to a XenServer resource pool. XenServer is already
installed on the host, but the NTP server settings are configured incorrectly on the host. Which file can the
administrator edit to adjust the NTP server settings on the new XenServer host?
A. /etc/ntp.conf
B. /etc/ntp/keys
C. /etc/init.d/ntpd
D. /etc/ntp/step-tickers
Answer: A
Citrix 1Y0-A26자격증 1Y0-A26 dump 1Y0-A26
NO.19 An administrator is planning to apply an update that has already been downloaded to a XenServer host
in production. What is the next step that the administrator needs to take in the update process?
A. Restart the host.
B. Generate the UUID for the patch.
C. Specify the UUIDs of the host and the patch.
D. Shut down, suspend or migrate the virtual machines running on the host.
Answer: D
Citrix 1Y0-A26 1Y0-A26
NO.20 An administrator needs to authenticate all users when they log into the XenServer pool using their
Windows credentials. What is the first step the administrator must take to achieve this?
A. Join the XenServer pool to the domain.
B. Add each user to the Users tab in XenCenter.
C. Create a XenServer user group within Active Directory.
D. Create Active Directory accounts for the XenServer users.
Answer: A
Citrix인증 1Y0-A26 1Y0-A26 1Y0-A26 dump 1Y0-A26
ITexamdump의 JN0-380덤프의 VCE테스트프로그램과 VCP510PSE덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TFIN52_64시험에 대비한 고품질 덤프와 00M-670시험 최신버전덤프를 제공해드립니다. 최고품질 000-455시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기