IBM 000-551인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. IBM 000-551덤프는ITExamDump제품이 최고랍니다.
ITExamDump의 IBM인증 000-551시험덤프는 고객님의 IT자격증을 취득하는 꿈을 실현시켜 드리는 시험패스의 지름길입니다. IBM인증 000-551덤프에는 실제시험문제의 거의 모든 문제를 적중하고 습니다. ITExamDump의 IBM인증 000-551덤프가 있으면 시험패스가 한결 간편해집니다.
ITExamDump의 IBM인증 000-551시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 IBM인증 000-551덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. IBM인증 000-551시험을 통과하여 자격증을 취득하려면ITExamDump의 IBM인증 000-551덤프로 시험준비공부를 하세요.
ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.
ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는IBM 000-551시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로IBM 000-551시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
IT업계에 종사하고 계시나요? 최근 유행하는IBM인증 000-551 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 IBM인증 000-551덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 IBM인증 000-551덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
시험 번호/코드: 000-551
시험 이름: IBM (IBM Certified Specialist - IBM Optim Implementation for Dist )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 122 문항
업데이트: 2014-01-18
000-551 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-551.html
NO.1 Given the choices shown below for storage: SAN, NAS, optical disk, Content Addressed Storage, and
tape Which archive data storage and access discussion should the IBM Optim implementation lead have
with the client project leads?
A.The lower cost storage medium will usually provide inadequate access to the archived data.
B.Always start with the least expensive storage medium and then increase access speed capabilities
based upon testing.
C.The archive access and reporting requirements should drive the decisions around archive storage.
D.Always start with the fastest storage medium and then move to slower medium over the data life cycle.
Answer:C
IBM 000-551 pdf 000-551최신덤프 000-551 dump 000-551
NO.2 Which document should be reviewed and validated at the end of the design and build phase?
A.Optim configurations document
B.solution design document
C.project success measures document
D.testing criteria document
Answer:B
IBM 000-551덤프 000-551 000-551
NO.3 One Optim report provides detailed performance information about your Archive, Extract and Delete
processes, including basic table and selection criteria information as defined in the Access Definition, the
number of key values used to retrieve rows, and DBMS Access statistical information. This report is
essential for tuning your Optim processes. What is the name of this report and where do you indicate that
Optim produce the report?
A.Process Report; selected for creation on the Archive or Extract Process Request.
B.Show Steps Report; provided on Access Definition Editor.
C.Statistical Report; selected for creation on the Archive or Extract Process Request.
D.File Access Definition Report; selected for use on the Archive Process Request.
Answer:C
IBM dumps 000-551 000-551 000-551 000-551인증
NO.4 What are three valid levels of Optim Security? (Choose three.)
A.Database Security
B.Object Security
C.Functional Security
D.Network Security
E.Archive File Security
Answer:B C E
IBM 000-551인증 000-551 dump 000-551 000-551덤프
NO.5 What are two possible locations where would you could find the fetch strategy chosen by Attunity when
working with an extended data source? (Choose two.)
A.nav.log
B.irpcd.log
C.optdbg.xml
D.db2trc file
E.admin_svc.log
Answer:A C
IBM자격증 000-551 000-551 000-551 000-551 000-551
NO.6 Which requirement statement should raise a "red flag" within the Requirements Analysis Phase?
A.The business is seeking to privatize all personally identifiable information (PII) within the application.
B.Archiving of orders and associated data, including file attachments, older than 10 years.
C.Access to the archives just like a database.
D.Daily processing of archives from production.
Answer:C
IBM dump 000-551 000-551 dumps
NO.7 Click the Exhibit button. In what Optim Implementation Methodology deliverable would the information
shown in the exhibit be documented?
A.Solution Design
B.Installation Step by Step Guide
C.Requiremements Mapping
D.Production Run Book
Answer:A
IBM자료 000-551기출문제 000-551 000-551기출문제
NO.8 Given the command line syntax shown below: PR0CMND /R JOB=PERSONNEL' OUTPUT=PER.TXT
MONITOR+ QUIET+ Which task is performed?
A.Runs the job named PERSONNEL, places the process report output in a file named PER.TXT, and
displays prompts and error dialogs during the process.
B.Schedules a job named PERSONNEL, stores the extracted data in a file named PER.TXT, and displays
information dialogs during the process.
C.Runs the job named PERSONNEL, places the process report output in a file named PER.TXT, and
displays information dialogs during the process.
D.Schedules the job named PERSONNEL, stores the extracted data in a file named PER.TXT, and
displays prompts and error dialogs during the process.
Answer:C
IBM 000-551 000-551 000-551 000-551자격증 000-551
NO.9 When using InfoSphere Federation Server to access Optim extended data sources, what must be
created to define a federated object?
A.a wrapper, a system definition, a user mapping, and a nickname
B.a wrapper, a server definition, a user mapping, and a DB Alias
C.a wrapper, a system definition, a nickname, and a DB Alias
D.a wrapper, a server definition, a user mapping, and a nickname
Answer:D
IBM 000-551 dump 000-551 000-551 dump 000-551 dump
NO.10 Which statement is correct with respect to setting expectations around archive access and reporting?
A.Access to archive data performs just like a database.
B.ODM must be used to access the archives.
C.Access using ODM provides nearline access to archived data.
D.Archive data access should rarely be required.
Answer:C
IBM 000-551 000-551 000-551 dumps
NO.11 In Attunity, where is the metadata stored?
A.On the server where IRPCD is running.
B.In XML files where it can be manually updated.
C.In the Optim Directory where the DB Alias is found.
D.On the client where Attunity Studio is running.
Answer:A
IBM시험문제 000-551 000-551 000-551자격증
NO.12 Click the Exhibit button. Given this information from the Relationships tab of an Access Definition, and
the information from this Show Steps report in the exhibit, why is the STATE_LOOKUP table listed as
UNTRAVERSED?
A.There is no active relationship for the STATE_LOOKUP table.
B.Q2 needs to be activated between SALES and STATE_LOOKUP.
C.Q1 needs to be de-activated between SALES and STATE_LOOKUP.
D.The relationship between SALES and STATE_LOOKUP is unselected.
Answer:B
IBM dumps 000-551 000-551 000-551자료
NO.13 You have installed the Optim Server on an AIX system. The system is configured with various internal
and external storage options attached to the server. Where should the Optim Temporary Work folder be
placed?
A.the attached archive appliance
B.the attached NAS device
C.the system's internal disk drives
D.the attached SAN device
Answer:C
IBM기출문제 000-551 000-551 000-551
NO.14 Who are two project team members on an Optim Data Privacy project that would impact the data
privacy specific requirements? (Choose two.)
A.client's data privacy compliance representative(s)
B.application developers that have knowledge of the data model
C.storage experts
D.client business subject matter experts (SME) with knowledge of any local or international data privacy
requirements
E.systems architecture team
Answer:A D
IBM 000-551 000-551 dumps
NO.15 In Optim implementations, which object aligns with the term "business object"?
A.Archive Request
B.Archive Reporting Tool
C.Access Definition
D.Archive File Collection
Answer:C
IBM 000-551 000-551 000-551시험문제 000-551
NO.16 When designing and building storage profiles that will include writing archived data to other than Tier 1
storage (e.g., Tape, WORM drive), which statement is correct?
A.All disk type and nondisk storage devices are fully supported by Optim.
B.Make sure to implement Archive File splitting, as Optim can only write split archive files to nondisk type
storage devices.
C.Make sure that archive files are no larger than 100 MB, as all nondisk supported storage devices can
only store data in 100 MB segments.
D.Local disk processing space is a consideration, since archive data may need to be written first to local
disk before any other storage devices.
Answer:D
IBM덤프 000-551 000-551
NO.17 Which performance enhancement do multiple database connections provide when used during an
extract or archive?
A.Multiple database connections allow you to extract/archive rows from multiple tables simultaneously.
B.Multiple database connections allow you to extract/archive rows from a single table concurrently.
C.Multiple database connections allow you to extract/archive rows only from Reference Tables
simultaneously.
D.Multiple database connections cannot be used during extract or archive, only during delete.
Answer:B
IBM pdf 000-551 dump 000-551 000-551자료 000-551
NO.18 An Archive File Collection is a list of Archive Files that are treated as a single data source by Open Data
Manager (ODM). Which two statements are true regarding Archive Collections? (Choose two.)
A.Use the Collections tab on the Archive Request Editor to specify the collection(s) in which the Archive
File should be added automatically.
B.An Archive File may belong to multiple Archive Collections, and an Archive Collection may contain
multiple Archive Files.
C.Archive Files contained within a collection do not need to be registered in the Archive Directory.
D.ODM, by default, processes the Archive Files in the collections in ascending date order based on the
dates the Archive Files were created.
E.An Archive File containing multiple tables with the same names and creator ids, but with different DB
Aliases, may be stored in an Archive Collection.
Answer:A B
IBM dumps 000-551 000-551최신덤프
NO.19 When performing an archive process that uses a Storage Profile, which action could be performed as a
result of using the storage profile?
A.Creates a connection to the database for use by the storage management device.
B.Creates a connection to the storage management device and copies an Archive File to a backup device.
C.Creates a storage allocation parameter for the storage or file management system.
D.Creates a duplicate of the existing information from the Archive Repository on the storage management
device.
Answer:B
IBM자격증 000-551 000-551 pdf 000-551자료 000-551
NO.20 Click the Exhibit button. Referring to the exhibit, what would be a success criteria for the given use
case?
A.The performance of the application will improve.
B.The archive, purge, and all related processes for the Orders object completes in less than six hours.
C.The Optim processing will remove old Order data from the database and be accessible using ODM.
D.The weekly archive and purge processing completes in six hours or less.
Answer:B
IBM자료 000-551자료 000-551 000-551최신덤프 000-551 000-551 pdf
NO.21 What are two prerequisites to an Optim archiving Project Kickoff meeting? (Choose two.)
A.Obtain all Optim software required for project.
B.Set up hardware for all environment installations.
C.Review the Optim and application specific documentation.
D.Finalize all archiving requirements.
E.Choose the project sponsor.
Answer:A C
IBM 000-551 pdf 000-551 000-551자료 000-551 dumps 000-551
NO.22 The Optim Initialization Exit facility provides which three benefits? (Choose three.)
A.Observes what is being done by a given user at various points in a programs logic.
B.Automates the reporting of Optim requests that fail.
C.Ensures that the users request meets your company security standards.
D.Changes the request, if needed, to pass your company standards or forbids the request altogether.
E.Adds support to Optim for new code pages.
Answer:A C D
IBM 000-551 dump 000-551 dumps 000-551인증 000-551자료
NO.23 You are installing IBM Optim into an Oracle environment. Which statement is correct about user
permissions?
A.The installation user requires the DBA role.
B.The installation user is the only user that can run Optim.
C.The installation user's permissions must be deleted once the installation is complete and all DB Aliases
are created .
D.The installation user must have the SELECT ANY DICTIONARY role, unless the Oracle
07_DICTIONARY _ACCESSIBILITY initialization parameter is set.
Answer:D
IBM 000-551 000-551 dump 000-551
NO.24 Why is it important to use the multiple column feature of Optim masking functions (e.g., Lookup,
Hash_Lookup) when using those functions to mask multiple fields in a table?
A.Use of the multiple column feature makes coding a column map much easier.
B.Use of this feature is only a matter of preference.
C.The multiple column feature allows you to concatenate multiple columns into a single column.
D.This feature significantly improves performance during the masking process.
Answer:D
IBM 000-551 dump 000-551자격증
NO.25 What does an Access Control List protect?
A.the Optim program
B.nav_util
C.Optim Configuration tasks
D.any Optim object
Answer:D
IBM기출문제 000-551 dumps 000-551
NO.26 When positioning ODM as a mechanism to view archived data, which two capabilities would you
promote? (Choose two.)
A.Only ODM provides for access to individual archive files and collections of archive files.
B.ODM will provide for the same levels of accessibility regardless of the underlying storage medium.
C.ODM can implement row level security for archive data within the Attunity Workspace layer.
D.ODM facilitates Native Application Access.
E.ODM can be run stand-alone without Optim on the same machine.
Answer:A D
IBM pdf 000-551 000-551 000-551
NO.27 You can specify the default minimum retention period for protecting Archive Files on Centera from
deletion. How is the minimum retention period calculated?
A.from the time Centera copies the file
B.from the time the Archive Process copies the file to Centera
C.from the time that the Archive Process copies the file to the local file system
D.from the time Centera copies the file from the local file system
Answer:B
IBM시험문제 000-551 000-551 pdf 000-551 000-551인증
NO.28 What is the primary purpose of the Optim Relationship Index Analyzer Dialog?
A.It automatically creates indexes regardless of the user's rights on the tables involved in relationships
used in all access definitions stored in an Optim Repository.
B.It reviews the last time the RDBMS statistics were updated for tables used in an access definition and
automatically issues the commands to update them if they have not been run since the last archive.
C.It analyzes the index b-trees and if they are inefficient, will drop and rebuild the index automatically or
can be scheduled.
D.It analyzes DBMS indexes for relationships used with the Access Definition and to create any needed
indexes, if the user has the correct privileges in the database.
Answer:D
IBM 000-551 dump 000-551 000-551
NO.29 Click the Exhibit button. Which Optim high level architecture area is missing from the exhibit for an
archiving project requiring a Collection of Archive Files for data reporting and viewing?
A.Optim Server
B.Extended Data Source Manager
C.WebSphere Application Server
D.ODM Server
Answer:D
IBM최신덤프 000-551 dumps 000-551 000-551 dumps
NO.30 You have exported an Archive Request and checked the 'export subordinate definitions' box. Which
types of objects might you expect to find in the export file?
A.Archive Request, Access Definition, Optim Relationships, Optim Primary Keys
B.Archive Request and Access Definition only
C.Archive Request, Access Definition, and Table Map
D.Archive Request, Access Definition, Storage Profile, Report Request
Answer:D
IBM 000-551인증 000-551자료 000-551
ITexamdump의 HP5-K01D덤프의 VCE테스트프로그램과 C-TSCM62-65덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-E56시험에 대비한 고품질 덤프와 ST0-237시험 최신버전덤프를 제공해드립니다. 최고품질 70-332시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기