ITExamDump에서 출시한 IBM인증000-733 덤프는 시험문제점유율이 가장 높은 시험대비자료입니다. 실제IBM인증000-733시험문제유형과 같은 형식으로 제작된IBM인증000-733 시험공부자료로서ITExamDump덤프의 실용가치를 자랑하고 있습니다.덤프를 공부하여 시험불합격하시면 덤프비용은 환불처리해드립니다.
IBM인증 000-733시험은 등록하였는데 시험준비는 아직이라구요? IBM인증 000-733시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의IBM인증 000-733덤프와의 근사한 만남이IBM인증 000-733패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의IBM인증 000-733덤프로 시험패스에 고고싱하세요.
ITExamDump에서는 IBM인증 000-733시험을 도전해보시려는 분들을 위해 퍼펙트한 IBM인증 000-733덤프를 가벼운 가격으로 제공해드립니다.덤프는IBM인증 000-733시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.
IBM인증000-733시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는IBM인증000-733시험패스로 꿈을 이루어주는 사이트입니다. 우리는IBM인증000-733시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게IBM인증000-733시험을 응시할 수 있는 자료입니다.
안심하시고ITExamDump 를 선택하게 하기 위하여, ITExamDump에서는 이미IBM 000-733인증시험의 일부 문제와 답을 사이트에 올려놨으니 체험해보실 수 있습니다. 그러면 저희한테 신뢰가 갈 것이며 또 망설임 없이 선택하게 될 것입니다. 저희 덤프로 여러분은 한번에 시험을 패스할 수 있으며 또 개인시간도 절약하고 무엇보다도 금전상으로 절약이 제일 크다고 봅니다. ITExamDump는 여러분들한테 최고의IBM 000-733문제와 답을 제공함으로 100%로의 보장 도를 자랑합니다, 여러분은IBM 000-733인증시험의 패스로 IT업계여서도 또 직장에서도 한층 업그레이드되실 수 있습니다. 여러분의 미래는 더욱더 아름다울 것입니다.
IBM 000-733인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. IBM 000-733덤프는ITExamDump제품이 최고랍니다.
시험 번호/코드: 000-733
시험 이름: IBM (IBM Certified Application Developer-DB29)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 140 문항
업데이트: 2014-01-18
IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다. IT인사들의 부담을 덜어드리기 위해ITExamDump는IBM인증 000-733인증시험에 대비한 고품질 덤프를 연구제작하였습니다. IBM인증 000-733시험을 준비하려면 많은 정력을 기울여야 하는데 회사의 야근에 시달리면서 시험공부까지 하려면 스트레스가 이만저만이 아니겠죠. ITExamDump 덤프를 구매하시면 이제 그런 고민은 끝입니다. 덤프에 있는 내용만 공부하시면 IT인증자격증 취득은 한방에 가능합니다.
000-733 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-733.html
NO.1 Given the following table and view definitions: CREATE TABLE city ( cityid INT GENERATED
ALWAYS AS IDENTITY , city_name CHAR(10), state_code CHAR(2) CHECK(state_code IN
('CA','IL','NY','OH','TX')));CREATE VIEW city_view AS ( SELECT city_name||','||state_code AS fullname
FROM city WHERE state_code NOT IN ('OH','IL')); and the following trigger definition:CREATE
TRIGGER city_viewInput INSTEAD OF INSERT ON city_view REFERENCING NEW AS nFOR EACH
ROW MODE DB2SQLBEGIN ATOMIC DECLARE delim INT;SET delim = LOCATE(',', n.fullname);
INSERT INTO city(city_name,state_code) VALUES(SUBSTR(n.fullname, 1, delim - 1),
SUBSTR(n.fullname, delim + 1, 2));END; If the following SQL statments are executed:INSERT INTO city
VALUES(DEFAULT,'San Jose','CA') ; INSERT INTO city_view VALUES('Chicago,IL'); INSERT INTO city
VALUES(DEFAULT,'Detroit','MI'); INSERT INTO city VALUES(DEFAULT,'Austin','TX'); INSERT INTO
city_view VALUES('Denver,CO'); How many rows will be returned by the following query: SELECT *
FROM city
A. 1
B. 2
C. 3
D. 4
Answer: C
IBM 000-733 pdf 000-733 000-733
NO.2 Which of the following ADO .NET providers is supported by IBM DB2 Add-ins for Visual Studio?
A. OLE DB .NET Data Provider
B. DB2 Data Provider for .NET
C. ODBC Data Provider for .NET
D. DB2 for i5/OS .NET Provider
Answer: B
IBM 000-733자격증 000-733 000-733 000-733
NO.3 An application running against a DB2 for AIX database needs to execute the following query:SELECT
t2.c2, t1.c3 FROM t1 INNER JOIN t2 ON t1.c1 = t2.c1 If table T1 resides in the DB2 for AIX database and
table T2 resides in a DB2 for i5/OS database, which of the followingDB2 object types must the identifier
T2 represent in order for this SQL statement to run successfully?
A. ALIAS
B. NICKNAME
C. SERVER TABLE
D. TABLE WRAPPER
Answer: B
IBM자격증 000-733자격증 000-733시험문제 000-733 dumps
NO.4 Which of the following SQL statements demonstrates the correct usage of a parameter marker?
A. SELECT ? FROM SYSCAT.TABLES
B. SELECT [] FROM SYSCAT.TABLES
C. SELECT CAST(? AS INTEGER) FROM SYSCAT.TABLES
D. SELECT CAST([] AS INTEGER) FROM SYSCAT.TABLES
Answer: C
IBM 000-733덤프 000-733 000-733최신덤프 000-733자격증
NO.5 Table EMPLOYEE contains the following rows: EMPNO FIRSTNME LASTNAME WORKDEPT
000010.CHRISTINE HAAS A00 000020 MICHAEL THOMPSON B01 000030 SALLY KWAN C01 The
isolation level for Application 1 is set to CS and autocommit is disabled. The isolation level for Application
2 is set to CS and the autocommit is enabled. The following statements are executed in sequence:
Application 1:
DECLARE c1 CURSOR FOR SELECT * FROM employee ORDER BY empno OPEN C1 FETCH C1
FETCH C1 Application 2:
UPDATE employee SET lastname = 'MILLFORD' WHERE empno = '000020' Which of the following
statements is correct?
A. The UPDATE succeeds because Application 2 runs with autocommit enabled so no row level locks are
necessary for the update.
B. The UPDATE succeeds because Application 1 holds a row level lock that is compatible with the lock
required by Application 2.
C. The UPDATE fails because Application 1 holds a row level read lock that is in conflict with the lock
required by Application 2.C.
D. The UPDATE fails because the row level locks held by Application 1 have been escalated to table lock
so updates by other connections are disallowed.
Answer: B
IBM 000-733 000-733 pdf 000-733시험문제 000-733인증
NO.6 After executing the following SQL statements: CREATE TABLE tab1 ( col1 INT ,col2 CHAR(1),
PRIMARY KEY(col1)); CREATE TABLE tab2 ( col1 INT ,col2 CHAR(1), FOREIGN KEY (col1)
REFERENCES tab1(col1) ON DELETE CASCADE ON UPDATE NO ACTION ); INSERT INTO tab1
VALUES(1, 'A'); INSERT INTO tab1 VALUES(2, 'B'); INSERT INTO tab2 VALUES(3, 'A'); INSERT INTO
tab2 VALUES(2, 'B'); UPDATE tab1 SET col1 = col1 + 1;DELETE FROM tab1 WHERE col2 = 'B';
What values will be returned by the following SQL query?SELECT col1, col2 FROM tab1 A.COL1 COL2
==== ==== 2 'B'
A. COL1 COL2 ==== ==== 2 'B'
B. COL1 COL2 ==== ==== 2 'A'
C. COL1 COL2 ==== ==== 1 'A' 2 'B'
D. COL1 COL2 ==== ==== 2 'A' 3 'B'
Answer: B
IBM 000-733 dump 000-733 000-733 pdf
NO.7 Given following table:
EMP
EMPNO NAME DEPTNO SALARY
=====
==== ======
======
0010 JOSH D95 30000
0020 JENNA D98 25000
0030 DYLAN
D95 10000
0040 TRACY D90 33000
and the following trigger definition:CREATE TRIGGER track_chgsAFTER UPDATE OF salary, name,
empno ON emp REFERENCING NEW_TABLE AS ntable FOR EACH STATEMENT MODE
DB2SQLBEGIN ATOMIC INSERT INTO changes SELECT empno, CURRENT TIMESTAMP FROM
ntable; END; After executing the following SQL statements:DELETE FROM changes; UPDATE emp SET
deptno = 'D98' WHERE deptno = 'D95'; INSERT INTO emp VALUES('0050', 'KEN', 'D90', 35000);
UPDATE emp SET salary = salary - 500 WHERE salary > 35000;UPDATE emp SET salary = salary +
1000 WHERE salary <= 25000;What value will be returned by this query?SELECT count(*) FROM
changes
A. 2
B. 3 C. 4
D. 6
Answer: A
IBM자료 000-733 000-733인증 000-733자료 000-733
NO.8 Given the following table definition:CREATE TABLE staff ( id SMALLINT NOT NULL, name
VARCHAR(9), dept SMALLINT, job CHAR(5)) Assuming that the following statements execute
successfully:Dim cmdStaff As DB2Command = cnDb2.CreateCommand() cmdStaff.CommandText =
"SELECT name FROM staff WHERE (job = @job)" Which of the following is the correct way to provide a
value for the parameter marker used?
A. cmdStaff.Parameters.Add("@job", "Mgr", CType(5, Char))
B. cmdStaff.Parameters.Add("@job", "Mgr", DB2Type.Char, 5)
C. cmdStaff.Parameters.Add(New DB2Parameter("@job", CType(5, Char))
cmdStaff.Parameters("@job").Value = "Mgr"
D. cmdStaff.Parameters.Add(New DB2Parameter("@job", DB2Type.Char, 5)
cmdStaff.Parameters("@job").Value ="Mgr"
Answer: D
IBM 000-733기출문제 000-733최신덤프 000-733기출문제
NO.9 A .NET application executes a SQL request invoking the DB2Command.ExecuteReader method and a
syntax errorexception is thrown. Which of the following properties contains the SQLCode for this syntax
error?
A. DB2Error.SQLCode
B. SQLError.SQLCode
C. DB2Exception.SQLCode
D. SQLException.SQLCode
Answer: A
IBM 000-733 000-733 000-733인증
NO.10 A table named ACTIVITY.LOG was created by executing the following statement:CREATE TABLE
activity.log (event VARCHAR(128), date DATE) Then, a stored procedure named ACTIVITY.LOGEVENT
was created by executing the following statement: CREATE PROCEDURE activity.logEvent(IN stmtType
CHAR(1)) LANGUAGE SQLMainBody: BEGIN DECLARE sqlerrm VARCHAR(256) DEFAULT '';
DECLARE ErrorIndicator CHAR(1) DEFAULT 'N';
SQLStmt: BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION
BEGIN
SET ErrorIndicator = 'Y';
END;
IF stmtType = 'I' THEN
INSERT INTO activity.log VALUES('Insert Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'U' THEN
INSERT INTO activity.log VALUES('Update Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'D' THEN I
NSERT INTO activity.log VALUES('Delete Operation Performed.', CURRENT_DATE);
ELSE
SET ErrorIndicator = 'Y';
END IF;
END SQLStmt;
IF ErrorIndicator = 'Y' THEN
SIGNAL SQLSTATE '70000' SET message_text = 'Could not update activity log.';
END IF;
END MainBody
User USER1 has the authority to access/manipulate data in the ACTIVITY.LOG table as well as to invoke
the
procedure ACTIVITY.LOGEVENT. If user USER1 executes the following commands:
CONNECT TO sample USER user1 USING ibmdb2;
DELETE FROM activity.log;
CALL activity.logEvent('i'); What will be the results?
A. The string "Insert Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
B. The string "Update Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
C. The string "Delete Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
D. The error message 'SQL0438N Application raised error with diagnostic text: "Could not update activity
log.".SQLSTATE=70000' will be generated.
Answer: D
IBM자격증 000-733 000-733 000-733인증
NO.11 Which of the following restrictions pertains to embedded SQL external routines?
A. Environment variables with names that start with 'DB2' are not allowed.
B. Executing statements or commands that are connection related is not allowed.
C. Environment variable values that were set before the DB2 database manager is started are not
available.
D. When returning result sets from external nested stored procedures, a cursor cannot be opened with
the same name onmultiple nesting levels.
Answer: B
IBM 000-733자료 000-733 000-733 pdf
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.
NO.12 Parameter markers are NOT permitted for which of the following statements?
A. CALL
B. DELETE C. EXECUTE IMMEDIATE
D. SET CURRENT SQLID
Answer: C
IBM최신덤프 000-733 000-733 000-733덤프 000-733 dumps
NO.13 Which of the following is a SQL stored procedure which will return a resultset containing ID, NAME,
DEPT and JOB values out of the STAFF table?
A. CREATE PROCEDURE result_set() LANGUAGE SQL BEGIN SELECT id, name, dept, job FROM
staff; END
B. CREATE PROCEDURE result_set LANGUAGE SQL RESULT SETS 1 BEGIN SELECT id, name,
dept, job FROM staff; END
C. CREATE PROCEDURE result_set RESULT SETS 1 BEGIN DECLARE c1 CURSOR FOR SELECT id,
name, dept, job FROM staff; OPEN C1; END
D. CREATE PROCEDURE result_set()
LANGUAGE SQL RESULT SETS 1 BEGIN DECLARE c1 CURSOR WITH RETURN FOR SELECT id,
name, dept, job FROM staff; OPEN c1; END
Answer: D
IBM 000-733 000-733 000-733기출문제
NO.14 What is the minimum privilege required to run a User Defined Function (UDF)?
A. CALL
B. EXECUTE
C. SYSCTRL
D. SYSMAINT
Answer: B
IBM 000-733 pdf 000-733
NO.15 After installing the DB2 Express-C 9 it was discovered that the Development Workbench was not
available. What
was the reason for that?
A. It must be installed separately.
B. It is not supported with DB2 Express-C 9.
C. Since it is a licensed tool, it must be purchased from IBM.
D. Review the DB2 installation log for errors. Reinstall DB2 Express-C 9.
Answer: A
IBM 000-733 000-733 000-733 000-733
NO.16 If the following code is executed in the order shown:conDB2 As
DB2ConnectionconDB2.ConnectionString =
"Database=samplelx;UID=db2user;PWD=db2pwd;"conDB2.Open() Which of the following statements is
correct?
A. An exception is thrown because the server name has not been specified.
B. An exception is thrown because the server name and the port have not been specified.
C. The execution is successful provided the host name SAMPLEX has been previously defined in the
local hosts table.
D. The execution is successful provided the database alias SAMPLEX has been previously defined in the
local database catalog.
Answer: D
IBM 000-733 000-733덤프 000-733시험문제
NO.17 Which of the following is a characteristic of an application that uses a Distributed Unit of Work
(DUOW)?
A. A single transaction can only read and/or modify data stored on one database server.
B. Multiple transactions can only read and/or modify data stored on one database server.
C. A single transaction can read and/or modify data stored across multiple database servers.
D. Multiple transactions can read and/or modify data stored on multiple database servers provided each
transaction only accesses a single server.
Answer: C
IBM덤프 000-733 000-733시험문제
NO.18 Which of the following is the DB2 Data Provider for the .NET class that requires a database connection
to be open?
A. DB2DataSet
B. DB2RecordSet
C. DB2DataReader
D. DB2DataAdapter
Answer: C
IBM 000-733자격증 000-733최신덤프 000-733덤프 000-733자격증
NO.19 An SQL procedure has been developed with several inline SQL PL statements encapsulated in a
dynamic compound SQL statement. The procedure had been tested and performed well. After making a
change to the last SQL statement the procedure not only failed to complete, but did not produce output
from any statements which were not modified. What is the best explanation for this behavior?
A. The dynamic compound SQL is atomic.
B. The procedure doesn't have any savepoints.
C. The procedure has not been correctly re-cataloged.
D. The dynamic compound SQL individual statements are logically dependent on each other.
Answer: A
IBM덤프 000-733자격증 000-733 000-733
NO.20 Two OLTP applications run concurrently but frequent locking occurs which requires a fix to be applied.
Application A inserts rows into the table T1. Application B submits several queries against the table with a
Cursor Stability isolation level. What would be the best course of action to improve the system's
concurrency and performance?
A. Application B should be changed to access a view of table T1.
B. Application B should be changed to a Read Stability isolation level.
C. Application A should be changed to perform a commit after each INSERT operation.
D. Application A should be changed to include the NOT WITH HOLD clause on each INSERT operation.
Answer: C
IBM 000-733 000-733최신덤프 000-733 000-733자료
ITexamdump의 70-486덤프의 VCE테스트프로그램과 000-474덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 200-120시험에 대비한 고품질 덤프와 HP2-B25시험 최신버전덤프를 제공해드립니다. 최고품질 BCP-340시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기