2013년 10월 24일 목요일

Genesys GE0-703 덤프자료

Genesys인증 GE0-703시험패스는 고객님의 IT업계종사자로서의 전환점이 될수 있습니다.자격증을 취득하여 승진 혹은 연봉협상 방면에서 자신만의 위치를 지키고 더욱 멋진 IT인사로 거듭날수 있도록 고고싱할수 있습니다. ITExamDump의 Genesys인증 GE0-703덤프는 시장에서 가장 최신버전으로서 시험패스를 보장해드립니다.

우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Genesys인증GE0-703시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며GE0-703시험은 한번에 패스할 수 있는 덤프입니다.

ITExamDump의 Genesys인증 GE0-703덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.Genesys인증 GE0-703시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.

시험 번호/코드: GE0-703
시험 이름: Genesys (GCP7 - Consultant, Voice Enterprise Edition)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 108 문항
업데이트: 2013-10-23

ITExamDump의Genesys인증 GE0-703덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의Genesys인증 GE0-703덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.

Genesys인증 GE0-703시험을 패스하고 싶다면ITExamDump에서 출시한Genesys인증 GE0-703덤프가 필수이겠죠. Genesys인증 GE0-703시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이Genesys인증 GE0-703시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한Genesys인증 GE0-703덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의Genesys인증 GE0-703공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면Genesys인증 GE0-703시험패스가 어렵지 않고 자격증취득이 쉬워집니다.

GE0-703 덤프무료샘플다운로드하기: http://www.itexamdump.com/GE0-703.html

NO.1 Which VCS/IPCS component controls the TDM telephony or IP Telephony interfaces?
A. PopGateway
B. Page Collector
C. MRCP Client
D. Net Management
Answer: A

Genesys   GE0-703   GE0-703 dumps

NO.2 Which GVP software component is used to configure the various components of GVP including
application provisioning?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: A

Genesys   GE0-703시험문제   GE0-703   GE0-703 dumps   GE0-703

NO.3 The <DNIS>.XML and <Application_Name>.xml files are generated when __________.
A. a call arrives at the VCS
B. an application is created and configured in EMPS
C. the WatchDog on the EMPS is restarted
D. requested by the IVR Server
Answer: B

Genesys   GE0-703기출문제   GE0-703자격증   GE0-703   GE0-703 dump

NO.4 For most deployments with VCS configured in Behind-the-Switch mode using Genesys Framework,
DNIS is obtained through what mechanism?
A. VCS request to the T-Server via IVR Server
B. VCS requests to the Dialogic telephony board
C. a route point corresponding to the appropriate strategy
D. VCS request directly to the ACD/PBX
Answer: A

Genesys   GE0-703덤프   GE0-703 dumps   GE0-703인증

NO.5 Which GVP application is used to build and test voice applications?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: D

Genesys   GE0-703   GE0-703   GE0-703덤프   GE0-703   GE0-703

NO.6 In an In-Front of the Switch configuration using Genesys Framework, __________.
A. the VCS receives all call routing information from the strategy
B. the DNIS must be delivered to the VCS with the call
C. a connection with the IVR Server is required
D. ANI is required to initiate or begin the call.
Answer: B

Genesys   GE0-703   GE0-703   GE0-703   GE0-703

NO.7 The DNIS.xml provides __________.
A. the Primary Application URL
B. all application configuration information but no process information
C. the address of the IVR Server
D. the URL path to the <Application_Name>.XML
Answer: D

Genesys자격증   GE0-703덤프   GE0-703자격증   GE0-703 pdf

NO.8 The process on the VCS/IPCS that starts the other component processes is the __________.
A. Page Collector
B. IVR Server Client
C. Call Flow Assistant
D. WatchDog
Answer: D

Genesys기출문제   GE0-703   GE0-703

NO.9 A logical group of ports is referred to as a __________.
A. Telephony Manager
B. Route
C. Page Collector
D. MRCP Client
Answer: B

Genesys pdf   GE0-703   GE0-703자격증   GE0-703시험문제   GE0-703   GE0-703

NO.10 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A

Genesys인증   GE0-703   GE0-703   GE0-703   GE0-703

NO.11 Which of the following are Windows prerequisites for VCS?
A. there are no Windows prerequisites
B. Active Directory
C. IIS and SNMP
D. SQL Server
Answer: C

Genesys   GE0-703   GE0-703   GE0-703자료

NO.12 The ability to record the caller's speech for application analysis is configured in an IVR Profile within
the EMPS and is referred to as __________.
A. OA&M
B. EMS Runtime
C. Enable ASR Transcoding
D. Enable ASR Logging
Answer: D

Genesys시험문제   GE0-703   GE0-703 dumps   GE0-703최신덤프

NO.13 Which of the following features can be changed using the Element Management System (EMS) GUI
when monitoring a VCS?
A. the log level for each process
B. the default directory for logging
C. the Behind or In-Front configuration for that particular VCS
D. the speech recognition vendor for that particular VCS
Answer: A

Genesys최신덤프   GE0-703자료   GE0-703 dump

NO.14 Where is the default location of the DNIS Application Mapping Files?
A. <install dir>\CN\data
B. <install dir>\CN\web\dispenser\spd_data
C. <install dir>\CN\config
D. http://EMPS:9810/spm
Answer: B

Genesys인증   GE0-703 dumps   GE0-703   GE0-703   GE0-703자격증

NO.15 How are VoiceXML pages produced during a GVP call session?
A. Web application server generates VoiceXML when processing asp or jsp pages
B. VCS or IPCS produce VoiceXML when the call is initiated
C. EMPS produces VoiceXML when the request comes in
D. IPCS creates the VoiceXML when it relays SIP messages
Answer: A

Genesys기출문제   GE0-703최신덤프   GE0-703   GE0-703 dumps   GE0-703 dumps

NO.16 In a Behind the Switch configuration, the VCS carries out instructions from __________.
A. IVR Server only, in the form of IVR ServerXML
B. T-Server only, in the form of TLib Events
C. Web Server, in the form of VoiceXML
D. IVR Server client, in the form of XML
Answer: C

Genesys   GE0-703 dump   GE0-703

NO.17 The <Application_Name>.xml files provides all of the __________.
A. VCS configuration information
B. voice application information
C. IPCS configuration information
D. web server configuration information
Answer: B

Genesys   GE0-703   GE0-703기출문제   GE0-703자격증

NO.18 When you make a change to a parameter, such as PopGateway, Route1, Route Type - from InBound
to OutBound, what needs to happen for this change to go into effect?
A. restart WatchDog
B. no need to restart anything. New parameter value goes into effect immediately
C. restart the EMPS
D. restart MRCP Server
Answer: A

Genesys   GE0-703 dump   GE0-703   GE0-703자료

NO.19 The Voice Communication Server (VCS) processes __________ calls.
A. VoIP
B. IPCS
C. Web-based GUI
D. TDM
Answer: D

Genesys pdf   GE0-703   GE0-703   GE0-703 pdf

NO.20 After WatchDog is started, GVP.ini file contains __________.
A. no configuration information for VCS/IPCS processes
B. application specific configuration information such as DNIS
C. the configuration information for VCS/IPCS processes, such as default log levels
D. only Dialogic configuration information
Answer: C

Genesys   GE0-703   GE0-703   GE0-703

NO.21 Under what circumstances is a username and password required to access the EMPS?
A. Never. By default, a username and password is not required since EMPS is only used for monitoring
purposes.
B. Always. When opening EMPS Login screen, the system will require users enter their username and
password.
C. Only when the EMPS is being accessed from a remote workstation. You are automatically
authenticated and can log in from a local machine.
D. Only when using SunOne Directory Server because OpenLDAP has no built-in security for the EMPS
login screen.
Answer: B

Genesys기출문제   GE0-703   GE0-703자격증   GE0-703

NO.22 Refer to the CTI Property tab in the Provisioning IVR profile section in the EMPS. The Default Route
Number is used when __________.
A. IVR Server is unable to contact the Solution Control Interface (SCI)
B. IVR Server is unable to contact the Universal Routing Server (URS), or when the URS is unable to
find an agent number to which it can route the call
C. IVR component, specifically Genesys Queue Adapter (GQA), cannot communicate with SCS.
D. IVR Server component cannot communicate with the Web Server
Answer: B

Genesys   GE0-703   GE0-703 dump

NO.23 A Primary Voice Application URL is required when provisioning the IVR Profile. The Primary Voice
Application CANNOT include __________.
A. the fully qualified name of the web server that hosts the application
B. the numeric IP address of the web server that hosts the application
C. the name of the first page of the voice application
D. the path to the <Application Name>.XML file
Answer: D

Genesys pdf   GE0-703덤프   GE0-703

NO.24 When the parameter localconfig is set equal to 1 (localconfig = 1) in GVP.ini, the WatchDog service
will __________.
A. not read the local GVP.ini file, using the latest configuration contained in the LDAP database for the
VCS/IPCS parameter settings
B. read the local GVP.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
C. read the local watchdog.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
D. read the local EMPS.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
Answer: B

Genesys   GE0-703   GE0-703   GE0-703기출문제

NO.25 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A

Genesys자료   GE0-703   GE0-703   GE0-703덤프

NO.26 To bring up the 9810 listener window in EMPS you need to expand Server, CORE, click on
<ServerName> and then follow which links?
A. Right-click on the Server and view
B. Click link for Network Management GUI to open the 9810 listener
C. Click the link for Server Explorer to open the 9810 listener
D. There are no available links for the 9810 listener window in the EMPS.
Answer: B

Genesys인증   GE0-703   GE0-703기출문제   GE0-703시험문제   GE0-703

NO.27 In the <Application_Name>.xml file, the IVRTimeout value determines __________.
A. how long URS waits for the response from web server before timing out and trying default routing
target.
B. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Backup IVR URL.
C. how long GQA waits for the connection with the IVR Server before using the Backup IVR URL.
D. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Primary IVR URL.
Answer: B

Genesys pdf   GE0-703   GE0-703 dumps

NO.28 When would you use the Import Server Instance CSV feature in EMPS?
A. Never. This feature is not available through the EMPS
B. Any time you want to make a change to any of the parameters in EMPS
C. You want to start the Watchdog service
D. When numerous changes are needed with servers or configuration of various components for a
server and in conjunction with Genesys Technical Support
Answer: D

Genesys최신덤프   GE0-703 dump   GE0-703   GE0-703

NO.29 The GVP VoiceXML application logic resides on __________.
A. a web server
B. the VCS
C. the VPM
D. the IPCM
Answer: A

Genesys   GE0-703   GE0-703   GE0-703인증   GE0-703

NO.30 Which version of the VoiceXML Specification does GVP version 7.5 support?
A. VoiceXML 1.0
B. VoiceXML 1.1
C. VoiceXML 2.0
D. VoiceXML 3.0
Answer: C

Genesys기출문제   GE0-703   GE0-703   GE0-703   GE0-703 dump

ITexamdump의 000-783덤프의 VCE테스트프로그램과 000-303덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-593시험에 대비한 고품질 덤프와 000-588시험 최신버전덤프를 제공해드립니다. 최고품질 700-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/GE0-703.html

댓글 없음:

댓글 쓰기