Microsoft인증 70-691시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 Microsoft인증 70-691덤프는Microsoft인증 70-691시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.
ITExamDump 는 완전히 여러분이 인증시험 준비와 안전한 시험패스를 위한 완벽한 덤프제공 사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 알 맞춤한 퍼펙트한 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편하게 인증시험을 패스할 수 있습니다.많은 it인증관연 응시자들은 우리 ITExamDump가 제공하는 문제와 답으로 되어있는 덤프로 자격증을 취득하셨습니다.우리 ITExamDump 또한 업계에서 아주 좋은 이미지를 가지고 있습니다.
Microsoft인증 70-691시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Microsoft인증 70-691덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Microsoft 인증70-691시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Microsoft 인증70-691시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.
Microsoft인증 70-691시험을 준비하기 위해 잠도 설쳐가면서 많이 힘들죠? ITExamDump덤프가 고객님의 곁을 지켜드립니다. ITExamDump에서 제공해드리는Microsoft인증 70-691덤프는 실제Microsoft인증 70-691시험문제를 연구하여 만든 공부자료이기에 최고의 품질을 자랑합니다. ITExamDump덤프를 열심히 공부하여 멋진 IT전문가의 꿈을 이루세요.
그렇게 많은 IT인증덤프공부자료를 제공하는 사이트중ITExamDump의 인지도가 제일 높은 원인은 무엇일가요?그건ITExamDump의 제품이 가장 좋다는 것을 의미합니다. ITExamDump에서 제공해드리는 Microsoft인증 70-691덤프공부자료는Microsoft인증 70-691실제시험문제에 초점을 맞추어 시험커버율이 거의 100%입니다. 이 덤프만 공부하시면Microsoft인증 70-691시험패스에 자신을 느끼게 됩니다.
시험 번호/코드: 70-691
시험 이름: Microsoft (TS: Windows HPC Server 2008, Developing)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 95 문항
업데이트: 2013-10-14
70-691 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-691.html
NO.1 You plan to develop a parallel application by using Windows HPC Server 2008.
The application performs the following tasks:
x Performs multistep calculations
x Processes data by using the same code segment that runs on each compute node
You need to ensure that each compute process executes the same step simultaneously.
Which type of communication should you use?
A. Buffered
B. Collective
C. Non-blocking
D. Point-to-point
Answer: B
Microsoft기출문제 70-691자격증 70-691기출문제 70-691 pdf
NO.2 You plan to develop a parallel application by using Windows HPC Server 2008.
You plan to use a method to control the calculations performed by each individual process.
You need to ensure that different commands can be sent to each process.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: A
Microsoft최신덤프 70-691 70-691 70-691
NO.3 printf("Pi = %d\n", pi);
NO.4 if(commRank == 0) {
NO.5 You plan to develop a single program multiple data (SPMD) application by using Windows HPC Server
2008.
You use multiple processes to perform intermediate calculations and to provide the results as a single
number.
You need to ensure that the intermediate results are collected and added together by using a single MPI
function.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: D
Microsoft기출문제 70-691 dump 70-691인증
NO.6 ++numDarts;
NO.7 if (x*x + y*y <= 1.0)
NO.8
NO.9 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to implement a method that will send different data to each process in a communicator by using
a single call.
Which function should you use?
A. MPI_Send
B. MPI_Gather
C. MPI_Reduce
D. MPI_Scatter
Answer: D
Microsoft 70-691 70-691
NO.10 }
NO.11 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
The application uses point-to-point communication.
The process that has a rank 0 sends an array of integer values to the rank 1 process by using the
following code segment. (Line numbers are included for reference only.)
01 int values[5];
02 MPI_Send(values, 5, MPI_INT, 1, 42,
03 MPI_COMM_WORLD);
You need to ensure that each receiving process is able to correctly receive the values in the most efficient
manner possible.
Which code segment should you use?
A. int values[5];
int buffer[5];
MPI_Reduce(buffer, values, 5, MPI_INT, MPI_SUM, 1, MPI_COMM_WORLD);
B. int values[5];
MPI_Status status;
MPI_Recv(values, 5, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
C. int value;
MPI_Status status;
MPI_Recv(&value, 1, MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
D. int values[5];
MPI_Status status;
MPI_Recv(values, sizeof(int), MPI_INT, 0, 42, MPI_COMM_WORLD, &status);
Answer: B
Microsoft pdf 70-691자료 70-691 70-691최신덤프
NO.12 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 MPI_Init(&argc, &argv);
02
03 {
04 // program part for rank 0
05
06 }
06 else
07 {
08 // program part for all other ranks
09 }
10 MPI_Finalize();
You need to ensure that the code in the rank 0 section only executes on the process that has a rank of 0.
Which code segment should you insert at line 02?
A. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size > 0)
B. int size;
MPI_Comm_size(MPI_COMM_WORLD, &size);
if (size == 0)
C. int rank
MPI_Comm_rank(MPI_COMM_WORLD, &rank);
if (rank == 0)
D. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(hostName, &resultlen);
char masterName[] = "rank0";
if (strcmp(masterName, hostName) != 0)
Answer: C
Microsoft시험문제 70-691 70-691인증 70-691최신덤프
NO.13 }
You need to ensure that the total number of numDarts is only available on the process that has a rank 0.
Which code segment should you insert at line 13?
A. MPI_Reduce(&numDarts, &total, 1, MPI_INT, MPI_SUM, 0, MPI_COMM_WORLD)
B. MPI_Allreduce(&total, &numDarts, 1, MPI_INT, MPI_SUM, MPI_COMM_WORLD)
C. MPI_Gather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, 0, MPI_COMM_WORLD)
D. MPI_Allgather(&numDarts, 1, MPI_INT, &total, 1, MPI_INT, MPI_COMM_WORLD)
Answer: A
Microsoft 70-691 70-691 70-691덤프
10. You plan to develop a Microsoft Message Passing Interface (MPI) application by using Microsoft
Visual Studio.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application.
You need to ensure that the application compiles for a 64-bit architecture.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the Import Library property to msmpi.lib.
B. Set the Additional Dependencies property to msmpi.lib.
C. Set the Additional Library Directories property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
D. Set the Additional Manifest Dependencies property to C:\Program Files\Microsoft HPC Pack 2008
SDK\lib\amd64.
Answer: BC
Microsoft dump 70-691 70-691자격증 70-691자격증 70-691덤프
11. You develop a parallel application by using Microsoft Visual Studio 2008.
You have installed the Microsoft HPC Pack 2008 SDK at C:\Program Files\Microsoft HPC Pack 2008
SDK.
You create a new console application based on Microsoft Message Passing Interface (MPI). You set the
Debugger to Launch property to MPI Cluster Debugger.
You need to ensure that five processes are launched when the application is run in debug mode in Visual
Studio 2008.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the MPIRun Arguments property to -n 5.
B. Set the Application Arguments property to -n 5.
C. Set the MPIRun Working Directory property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin.
D. Set the MPIRun Command property to C:\Program Files\Microsoft HPC Pack 2008 SDK\bin\MPIExec.
E. Set the Application Command property to C:\Program Files\Microsoft HPC Pack 2008
SDK\bin\MPIExec.
Answer: AD
Microsoft시험문제 70-691 70-691시험문제 70-691
12. You create a parallel application by using Microsoft Visual Studio 2008.
The application prints a message to the console of all Microsoft Message Passing Interface (MPI)
processes except for one. The application terminates and displays an error message.
You need to change the code in the application so that the application completes successfully.
Which set of tasks should you include in the application?
A. Include mpi.h
Link to msmpi.lib
Call MPI_Start
Call MPI_Comm_rank
Call MPI_Finalize
B. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_rank
Call MPI_Finalize
C. Include mpi.h
Link to ccpapi.tlb
Call MPI_Init
Call MPI_Comm_rank
D. Include mpi.h
Link to msmpi.lib
Call MPI_Init
Call MPI_Comm_size
Answer: B
Microsoft인증 70-691 70-691
13. You plan to create a parallel application by using Microsoft Visual C++.
You want to use the Microsoft Message Passing Interface (MPI) library in the application.
You need to ensure that the application can be compiled for both 32-bit and 64-bit platforms. You also
need to ensure that targeting both platforms requires minimum maintenance.
What should you do?
A. Create a separate project for each platform.
B. Create separate solution files for each platform.
C. Create separate custom build rules for each platform.
D. Create a separate build configuration for each platform.
Answer: D
Microsoft시험문제 70-691기출문제 70-691 70-691기출문제 70-691
14. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
The application process is named MPIApplication.exe. You plan to debug the application by using the MPI
Cluster Debugger in Visual Studio 2008.
You need to attach the debugger to the remote process on a compute node.
Which process should you attach to?
A. smpd.exe
B. mpiexec.exe
C. msvmon.exe
D. MPIApplication.exe
Answer: C
Microsoft 70-691 70-691덤프 70-691 pdf
15. You create a Microsoft Message Passing Interface (MPI) application by using Microsoft Visual Studio
2008.
You plan to debug the application by using Visual Studio 2008.
You need to configure the nodes that will be used for debugging.
What should you do?
A. Use the Cluster Debugger Configuration tool in Visual Studio.
B. Use the debugging pane in the Visual Studio project property pages.
C. Use the configuration pane in the Cluster Administration Console tool.
D. Use the node management pane in the Cluster Administration Console tool.
Answer: A
Microsoft자격증 70-691 70-691
NO.14 You plan to develop a parallel application by using Windows HPC Server 2008.
You need to ensure that when the application starts, a parameter value is communicated to each process
in the cluster by using a single call.
Which function should you use?
A. MPI_Send
B. MPI_Bcast
C. MPI_Gather
D. MPI_Reduce
Answer: B
Microsoft 70-691최신덤프 70-691 70-691자료
NO.15 pi = 4 * total/(commSize * totDarts);
NO.16 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment. (Line numbers are included for reference only.)
01 int rank;
02 MPI_Comm_rank(MPI_COMM_WORLD, &rank);
03 // declaration of variable hostName
04 // code to execute
05
06 std::cout << "hostname of rank " << rank;
07 std::cout << ": " << hostName << "\n";
You need to ensure that a variable named hostName contains the name of the cluster node that the code
runs on.
Which code segment should you add at line 05?
A. char *hostName = getenv("MPI_HOSTNAME");
B. char hostName[MPI_MAX_PROCESSOR_NAME];
int resultlen;
MPI_Get_processor_name(&resultlen, hostName);
C. char hostName[MPI_MAX_NAME_STRING];
int resultlen;
MPI_Comm_get_name(MPI_COMM_WORLD, hostName, &resultlen);
D. char hostName[256];
int resultlen = sizeof(hostName);
if (rank == 0)
{
gethostname(hostName, resultlen);
}
Answer: B
Microsoft 70-691 pdf 70-691
NO.17 You develop a parallel application that will be deployed on a Windows HPC Server 2008 cluster.
You write the following code segment that computes an approximation to Pi. (Line numbers are included
for reference only.)
01 static int totDarts = 10000;
02 int numDarts = 0;
03
04 MPI_Comm_size(MPI_COMM_WORLD, &commSize);
05 MPI_Comm_rank(MPI_COMM_WORLD, &commRank);
06
07 for(i = 0; i < totDarts; i++) {
08 x = 2 * (randomNr() - 0.5);
09 y = 2 * (randomNr() - 0.5);
ITexamdump의 HH0-050덤프의 VCE테스트프로그램과 100-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C_TFIN52_64시험에 대비한 고품질 덤프와 70-460시험 최신버전덤프를 제공해드립니다. 최고품질 70-417시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기