우리 ITExamDump사이트에서 제공되는Avaya인증7004.1시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Avaya인증7004.1시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
ITExamDump선택으로Avaya 7004.1시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Avaya 7004.1관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Avaya 7004.1덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
시험 번호/코드: 7004.1
시험 이름: Avaya (Avaya Communication Server 1000 for Avaya Aura® Maintenance Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 66 문항
업데이트: 2014-03-10
IT업계에 종사하는 분이라면 국제적으로 인정받는 IT인증시험에 도전하여 자격증을 취득하셔야 합니다. ITExamDump의 Avaya인증 7004.1덤프는 이 시험에 참가한 IT인사들의 검증을 받은 최신 시험대비 공부자료입니다. ITExamDump의 Avaya인증 7004.1덤프로 시험을 쉽게 패스하여 자격증을 취득하면 승진이나 연봉인상에 많은 편리를 가져다드립니다. 저희는 항상 여러분들의 곁을 지켜줄것입니다.
Avaya인증 7004.1시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의Avaya인증 7004.1덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의Avaya인증 7004.1덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
ITExamDump의 Avaya인증7004.1시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Avaya인증7004.1시험덤프자료를 제공받을수 있습니다.
7004.1 덤프무료샘플다운로드하기: http://www.itexamdump.com/7004.1.html
NO.1 Click the Exhibit button.
Given the SDRR programming options shown in the exhibit, which SDRR programming would allow a
user to dial 1-900-867-3333, but not successfully dial any other 1-900 based number?
A. Table 1
B. Table 2
C. Table 3
D. Table 4
Answer: A
Avaya dump 7004.1 7004.1 7004.1
NO.2 Click the Exhibit button.
Given the customer ¯ s p r og r a mm ed da t abase sho w n i n t he exh i b it and AC 1 = 9 , ove r w h i ch R L I w ill a ca ll
placed to 9-1-912-534-2222 complete?
A. RLI 9
B. RLI 4
C. RLI 3
D. RLI 2
E. call will not complete as dialed
Answer: B
Avaya자료 7004.1기출문제 7004.1
NO.3 An administrator is programming an NRS for the first time on a new Communication Server 1000
system RIS. 7.0 system. When attempting to add the Service Domain, it cannot be added as the Add
button is grayed out in the NRS.
Which tasked should you perform to resolve this issue?
A. reinstall the Signaling Server Software
B. reinstall the NRS software
C. switch from Standby database to Active database
D. switch from Active database to Standby database
Answer: D
Avaya 7004.1덤프 7004.1 7004.1
NO.4 Click the Exhibit button.
Given the customer Route List index shown in the exhibit, what is the first expensive route that a
call placed on that RLI could take?
A. Entry 0
B. Entry 1
C. Entry 2
D. Entry 3
Answer: C
Avaya dumps 7004.1 7004.1 pdf 7004.1 pdf
NO.5 For a situation where you use the CDP feature at a switch equipped with the MARS software package,
which statement are correct? (Choose two)
A. Use steering codes tor CDP calls that are the same as the assignedNARS Access Cades.
B. Use steering codes tor CDP calls that aredistinct from thoseassigned NARS Access Cades.
C. You can integrate CDP numbers with the NARS Uniform Dialing Plan (UDP).
D. Youcannot shareRoute Lists,Digit Manipulation tables and Time-of-Day schedule withNARS.
Answer: B,C
Avaya pdf 7004.1 dump 7004.1 7004.1 7004.1덤프 7004.1
NO.6 The Satellite Link Control feature ensures that the configuration of a call does not include more than one
communications satellite trunk. Tandem trunk calls, when connected through more than one
communication satellite trunk, are subject to transmission distortion due to propagation.
Which parameters are required to be equipped or configured for Satellite Link Control in the
Communication Server 1000?
A. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 signaling.
Route must be designated as a satellite route.
B. Route must be configured with STD or ETN signaling.
Route must be designated as a satellite route.
C. Network Transfer (NXFR) package must be equipped.
Route must be configured with ESN2 or ESN3 signaling
Route must be designated as a satellite route.
D. Network Signaling (NSIG) package must be equipped.
Route must be configured with ESN3 or ESN5 signaling.
Route must be programmed with a Traveling Class of Service (TCOS)
Answer: A
Avaya인증 7004.1 7004.1
NO.7 A customer has a Communication Server 1000 RIs. 7 x system at their site. You have been asked to
add the Call Pickup feature to the ten IP telephones in the sales department. The customer wants to be
sure active calls are not lost when the change are made.
Which Phones Configuration feature can be enabled allowed you to ensure changes to the telephones
are not transmitted to the call server until the telephone is not busy?
A. Bulk change
B. Courtesy change
C. Group change
D. Template change
Answer: B
Avaya pdf 7004.1 7004.1 7004.1
NO.8 Click the Exhibit button.
Consider a company ¯ s d i a li ng p l an sho w n i n t he exh i b it and an exa m p l e f o r it s r equ ir e m en t s :
A station user at the company, with Location Code 221, placed an ESN call, dialing 7-221-2581. This
would be an On-Net call and the NARS programming must remove the LOC code and dial the DN
internally.
What programming would remove the location code for a call dialed within the originating Communication
Server 1000 to a DN on that same Communication Server 1000?
A. Each site would have its own Location Code programmed as a Home Location Code(HLOC) under
Translation Table #1 in their CS 1000.
B. The location codes for each site would be programmed under the LOC programming in Translation
Table #2 at all locations.
C. Home NPA Codes (HNPA) for each site would be programmed under Translation Table #1 at each
location in their CS 1000.
D. Each site would have the Location Codesfor all sites programmed as Home Location Codes (HLOC) in
Translation Table #1 of their CS 1000.
Answer: A
Avaya 7004.1 7004.1 7004.1덤프 7004.1 7004.1
NO.9 Click the Exhibit button.
A customer has asked if the Communication Server 1000 RIs. 7 x system can route anyone that dial an
unassigned number in the customer ¯ s D I D r ange t o t he A tt endan t.
In reviewing the current configuration as shown in the exhibit, what do you conclude?
(Choose two)
A. only internalstation users are routing to the Attendant
B. internal station users and non tie line users are routing to the Attendant
C. all caller types are receiving an overflow tone
D. NET_DATA Attendant and tie trunk users are receiving an overflow tone
Answer: B
Avaya 7004.1 7004.1인증 7004.1
NO.10 A customer has deployed a Communication Server 1000 RIs. 7 x system at their site. Their sales
department is expanding and you have been asked to add Ave new telephones with the same capabilities
as the existing telephones in the department.
Which programming command should you use to complete this task.?
A. Move to DN
B. Move from TN
C. Copy from DN
D. Copy from TN
Answer: D
Avaya dumps 7004.1최신덤프 7004.1 7004.1 7004.1 7004.1덤프
ITexamdump의 1z0-465덤프의 VCE테스트프로그램과 1Y0-300덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-461시험에 대비한 고품질 덤프와 1Z1-536시험 최신버전덤프를 제공해드립니다. 최고품질 70-415시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기