SAP C_TSCM42_64인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에SAP C_TSCM42_64관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.
SAP인증 C_TSCM42_64시험을 준비하기 위해 잠도 설쳐가면서 많이 힘들죠? ITExamDump덤프가 고객님의 곁을 지켜드립니다. ITExamDump에서 제공해드리는SAP인증 C_TSCM42_64덤프는 실제SAP인증 C_TSCM42_64시험문제를 연구하여 만든 공부자료이기에 최고의 품질을 자랑합니다. ITExamDump덤프를 열심히 공부하여 멋진 IT전문가의 꿈을 이루세요.
시험 번호/코드: C_TSCM42_64
시험 이름: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-03-16
ITExamDump의 SAP인증C_TSCM42_64시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의SAP인증C_TSCM42_64시험덤프자료를 제공받을수 있습니다.
ITExamDump의 연구팀에서는SAP C_TSCM42_64인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드SAP C_TSCM42_64덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에SAP C_TSCM42_64이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이SAP C_TSCM42_64시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.
ITExamDump에서는SAP 인증C_TSCM42_64시험대비덤프를 발췌하여 제공해드립니다. SAP 인증C_TSCM42_64시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인SAP 인증C_TSCM42_64시험대비덤프로SAP 인증C_TSCM42_64시험준비공부를 해보세요. 통과율이 100%입니다.
C_TSCM42_64 덤프무료샘플다운로드하기: http://www.itexamdump.com/C_TSCM42_64.html
NO.1 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP기출문제 C_TSCM42_64자격증 C_TSCM42_64 C_TSCM42_64
NO.2 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP dumps C_TSCM42_64 C_TSCM42_64덤프
NO.3 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP C_TSCM42_64최신덤프 C_TSCM42_64 dump C_TSCM42_64 C_TSCM42_64 dump
NO.4 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP C_TSCM42_64 C_TSCM42_64인증 C_TSCM42_64 C_TSCM42_64시험문제
NO.5 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP시험문제 C_TSCM42_64기출문제 C_TSCM42_64기출문제 C_TSCM42_64
NO.6 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP dumps C_TSCM42_64 C_TSCM42_64 dump
NO.7 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP인증 C_TSCM42_64 C_TSCM42_64기출문제
NO.8 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.9 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP C_TSCM42_64 dumps C_TSCM42_64자격증
NO.10 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP C_TSCM42_64자격증 C_TSCM42_64 C_TSCM42_64기출문제
ITexamdump의 000-652덤프의 VCE테스트프로그램과 100-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 700-101시험에 대비한 고품질 덤프와 200-120시험 최신버전덤프를 제공해드립니다. 최고품질 JK0-U11시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기