ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는SAP C_TBIT44_71시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로SAP C_TBIT44_71시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
ITExamDump의 SAP인증C_TBIT44_71시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의SAP인증C_TBIT44_71시험덤프자료를 제공받을수 있습니다.
SAP인증 C_TBIT44_71시험을 준비하기 위해 잠도 설쳐가면서 많이 힘들죠? ITExamDump덤프가 고객님의 곁을 지켜드립니다. ITExamDump에서 제공해드리는SAP인증 C_TBIT44_71덤프는 실제SAP인증 C_TBIT44_71시험문제를 연구하여 만든 공부자료이기에 최고의 품질을 자랑합니다. ITExamDump덤프를 열심히 공부하여 멋진 IT전문가의 꿈을 이루세요.
시험 번호/코드: C_TBIT44_71
시험 이름: SAP (SAP Certified Development Associate - Process Integration with SAP NetWeaver (PI 7.1))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-02-10
ITExamDump는 저희 제품을 구매한 분들이 100%통과율을 보장해드리도록 최선을 다하고 있습니다. ITExamDump를 선택한것은 시험패스와 자격증취득을 예약한것과 같습니다. ITExamDump의 믿음직한 SAP인증 C_TBIT44_71덤프를 공부해보세요.
ITExamDump의 SAP인증 C_TBIT44_71덤프를 구매하시고 공부하시면 밝은 미래를 예약한것과 같습니다. ITExamDump의 SAP인증 C_TBIT44_71덤프는 고객님이 시험에서 통과하여 중요한 IT인증자격증을 취득하게끔 도와드립니다. IT인증자격증은 국제적으로 인정받기에 취직이나 승진 혹은 이직에 힘을 가해드립니다. 학원공부나 다른 시험자료가 필요없이ITExamDump의 SAP인증 C_TBIT44_71덤프만 공부하시면SAP인증 C_TBIT44_71시험을 패스하여 자격증을 취득할수 있습니다.
SAP C_TBIT44_71인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. SAP C_TBIT44_71덤프는ITExamDump제품이 최고랍니다.
C_TBIT44_71 덤프무료샘플다운로드하기: http://www.itexamdump.com/C_TBIT44_71.html
NO.1 You can create multiple configurations for one Integration Process without changing the appropriate
process definition.
Which of these parameters allows you to achieve this behavior?
A. Process Signature
B. Container Definition
C. Correlation
D. Configurable Parameters in Conditions
Answer: D
SAP dumps C_TBIT44_71 C_TBIT44_71
NO.2 Which statements are correct when using the Receiver File adapter to process XML messages?
A. The messages are processed based on a poll cycle.
B. The adapter can convert the XML payload into a flat file.
C. The adapter can FTP the file to a remote directory.
D. The quality of service can be 'best effort' (BE) only.
Answer: B,C
SAP pdf C_TBIT44_71 C_TBIT44_71 C_TBIT44_71
NO.3 Assume that your customer has a scenario in which a database table needs to be queried (i.e. to
perform a SELECT statement and obtain the result set).
What are the viable options for implementing this with the PI JDBC adapter?
A. Use the sender JDBC adapter to query the database asynchronously.
B. Use the sender JDBC adapter to query the database synchronously.
C. Use the receiver JDBC adapter to query the database synchronously.
D. Use the receiver JDBC adapter to query the database asynchronously.
Answer: A,C
SAP C_TBIT44_71 C_TBIT44_71자격증 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71자격증
NO.4 The PI Mail adapter is used to send and receive emails. Which protocols are supported?
A. SMTP
B. HTTP
C. IMAP4
D. POP3
Answer: A,C,D
SAP dump C_TBIT44_71 C_TBIT44_71
NO.5 If a system error occurs in a send step, an alert can be triggered for Alert Management and the
integration process should then be terminated.
Where do you define the Alert Category for the appropriate Control Step?
A. Within the SLD
B. Within the transaction ALRTCATDEF on the Integration Server
C. Within the Enterprise Services Builder
D. Within the Process Editor
Answer: B
SAP C_TBIT44_71 C_TBIT44_71자료 C_TBIT44_71 dump C_TBIT44_71
NO.6 A special aspect in B2B business processes is that the business partners involved in these processes
do not usually provide information about their internal system landscape.
Which configuration objects are relevant for B2B configuration?
A. Receiver Determination
B. Communication Party
C. Software Component Version (SWCV)
D. Communication Channel
Answer: A,B,D
SAP C_TBIT44_71 C_TBIT44_71 C_TBIT44_71 dump C_TBIT44_71시험문제
NO.7 For the delivery mode of an integration process, you can choose between inbound processing with or
without buffering.
Which of these statements correctly describes the Inbound processing mode?
A. SAP recommends the mode for inbound processing with buffering.
B. SAP recommends the mode for inbound processing without buffering.
C. If you select inbound processing without buffering, the qRFC entry returns an error when a message is
to be delivered to a process instance for which no receive step is active.
D. If you select inbound processing with buffering and there is no active receive step available to receive
an incoming message, the message is buffered in a separate, process-instance-specific queue.
Answer: B,C,D
SAP C_TBIT44_71인증 C_TBIT44_71 C_TBIT44_71시험문제
NO.8 You have created a deadline branch. When the deadline has expired, the integration process should be
canceled.
How can this be achieved?
A. In the deadline branch, insert a control step that cancels the process.
B. The process is automatically stopped once the deadline has expired.
C. As the process can only be stopped by the administrator, a control step that raises an alert to inform
the administrator has to be inserted.
D. Insert a switch with an appropriate condition to stop the process.
Answer: A
SAP C_TBIT44_71 C_TBIT44_71인증 C_TBIT44_71
NO.9 You configure the sender RFC adapter to convert RFC calls from a sender to XML messages. These
XML messages are then sent to the Integration Server or to the PCK.
What is the purpose of the RFC adapter parameter "Program ID"?
A. The Program ID is a unique identifier for outbound proxies.
B. The Program ID must uniquely describe the RFC sender communication channel in the configured
application server gateway.
C. The Program ID identifies proxy classes for Service Interfaces.
D. The Program ID is used in correlation for binding abstract interfaces.
Answer: B
SAP C_TBIT44_71 dump C_TBIT44_71인증 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71인증
NO.10 You are implementing an IDoc-based scenario using SAP Netweaver PI and more specifically the
sender IDoc adapter.
Which of these steps are mandatory for the sender IDoc adapter to function properly?
A. IDoc metadata must be imported into the Enterprise Services Repository.
B. The Logical System name (ALE name) for the Business System must be defined in the SLD.
C. A sender communication channel must be defined in the Integration Builder.
D. An RFC destination must be defined on the sender system, pointing to the Integration Server client.
Answer: A,B,D
SAP C_TBIT44_71자격증 C_TBIT44_71 C_TBIT44_71 C_TBIT44_71시험문제 C_TBIT44_71덤프
NO.11 You have implemented a scenario where IDocs are posted to an ERP system using the receiver IDoc
adapter.
Which statements correctly describe the receiver IDoc adapter of SAP NetWeaver PI?
A. IDoc packages are not supported, unless all IDocs are collected by BPM.
B. Specific fields in the IDoc control record can be overwritten using the 'header mapping' functionality in
the Receiver Agreement.
C. Quality of service EOIO (exactly once in order) is supported, provided that the target system is a SAP
Web AS 6.40 or above.
D. If the target system is SAP Web AS 6.20 or under, then the quality of service BE (best effort) and EO
(exactly once) can be used.
E. A receiver communication channel must be defined in the Integration Builder.
Answer: B,C,E
SAP C_TBIT44_71인증 C_TBIT44_71인증 C_TBIT44_71 C_TBIT44_71
NO.12 To react to situations where it is not possible or not advisable to continue a process in the normal way,
you can define exceptions.
Which statements correctly describe the triggering of exceptions?
A. A synchronous or asynchronous Send step can trigger an exception when a system error occurs.
B. Every step type can trigger an exception when a permanent error occurs.
C. A Control step can trigger an exception.
D. A Transformation step can trigger an exception.
E. Exceptions can only be triggered by Control steps.
Answer: A,C,D
SAP C_TBIT44_71 dump C_TBIT44_71자격증 C_TBIT44_71기출문제
NO.13 Which of these operations can be performed by a Container Operation step?
A. Incrementing a counter variable.
B. Appending a message to a multiline container element.
C. Removing a message from a multiline container element.
D. Setting the value of an XML element of a message.
Answer: A,B
SAP dumps C_TBIT44_71 C_TBIT44_71인증 C_TBIT44_71 dumps
NO.14 Which Process Integration objects can be used in an integration process?
A. All objects displayed in the navigation area of the Integration Builder.
B. All objects within the software component version of the integration process.
C. Only the objects within the namespace of the integration process.
D. All objects displayed in the Process Integration Scenario using this process.
Answer: B
SAP C_TBIT44_71시험문제 C_TBIT44_71기출문제 C_TBIT44_71덤프 C_TBIT44_71 C_TBIT44_71
NO.15 The communication between the Integration Server and the backend applications can be achieved
without adapters.
Which message protocol should you use for this communication type?
A. RFC-XML
B. PI-SOAP Protocol
C. File
D. JDBC 2.0
Answer: B
SAP C_TBIT44_71 C_TBIT44_71덤프 C_TBIT44_71자료 C_TBIT44_71인증
ITexamdump의 MB5-854덤프의 VCE테스트프로그램과 70-462덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 E20-554시험에 대비한 고품질 덤프와 074-409시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N43시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기