ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. Hitachi 인증HH0-280덤프 무료샘플을 다운받아 체험해보세요.
취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. Hitachi인증 HH0-280시험은 널리 인정받는 인기자격증의 시험과목입니다. Hitachi인증 HH0-280시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의Hitachi인증 HH0-280덤프는 시험패스율이 높아Hitachi인증 HH0-280시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.
지금 사회에 능력자들은 아주 많습니다.it인재들도 더욱더 많아지고 있습니다.많은 it인사들은 모두 관연 it인증시험에 참가하여 자격증취득을 합니다.자기만의 자리를 확실히 지키고 더 높은 자리에 오르자면 필요한 스펙이니까요.HH0-280시험은Hitachi인증의 중요한 시험이고 또 많은 it인사들은Hitachi자격증을 취득하려고 노력하고 있습니다.
성공으로 향하는 길에는 많은 방법과 방식이 있습니다. Hitachi인증 HH0-280시험을 패스하는 길에는ITExamDump의Hitachi인증 HH0-280덤프가 있습니다. ITExamDump의Hitachi인증 HH0-280덤프는 실제시험 출제방향에 초점을 두어 연구제작한 시험준비공부자료로서 높은 시험적중율과 시험패스율을 자랑합니다.국제적으로 승인해주는 IT자격증을 취득하시면 취직 혹은 승진이 쉬워집니다.
우리ITExamDump 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과Hitachi HH0-280인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITExamDump에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여Hitachi HH0-280관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.
시험 번호/코드: HH0-280
시험 이름: Hitachi (HDS Implemetation Specialist - Storage Management)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 100 문항
업데이트: 2014-02-26
Hitachi 인증 HH0-280시험이 너무 어려워서 시험 볼 엄두도 나지 않는다구요? ITExamDump 덤프만 공부하신다면 IT인증시험공부고민은 이젠 그만 하셔도 됩니다. ITExamDump에서 제공해드리는Hitachi 인증 HH0-280시험대비 덤프는 덤프제공사이트에서 가장 최신버전이여서 시험패스는 한방에 갑니다. Hitachi 인증 HH0-280시험뿐만 아니라 IT인증시험에 관한 모든 시험에 대비한 덤프를 제공해드립니다. 많은 애용 바랍니다.
빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Hitachi HH0-280인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.
HH0-280 덤프무료샘플다운로드하기: http://www.itexamdump.com/HH0-280.html
NO.1 Which two operating systems running on the Hitachi Dynamic Link Manager (HDLM) hosts are
supported by Hitachi Global Link Availability Manager (HGLAM)? (Choose two.)
A. IBM AIX 5.3
B. IBM z/OS 1.6
C. Sun Solaris 8
D. Windows NT 4.0
Answer: AC
Hitachi HH0-280최신덤프 HH0-280시험문제 HH0-280
NO.2 In a Solaris installation of Hitachi Tiered Storage Manager (HTSM), which command would you use to
start and stop HTSM from the command line?
A. "hcmdtsm /start", "hcmdtsm /stop"
B. "htsmssrv /start", "htsmssrv /stop"
C. "htsmserver start", "htsmserver stop"
D. "hcmdssrv /start /type TieredStorageManager", "hcmdssrv /stop /type TieredStorageManager"
Answer: C
Hitachi HH0-280 dumps HH0-280시험문제 HH0-280최신덤프 HH0-280 dump
NO.3 A customer has five hosts available to install the Hitachi Device Manager (HDvM) server; a Solaris
server with 512 MB of RAM; a Linux server with 1 GB of RAM; a AIX server with 4 GB RAM; and an
active/passive Windows cluster running Hitachi Storage Services Manager (HSSM) (each node has 4 GB
RAM).
On which server can HDvM be installed?
A. AIX
B. Linux
C. Solaris
D. Windows
Answer: B
Hitachi HH0-280 HH0-280자료 HH0-280
NO.4 A Hitachi Storage Services Manager (HSSM) customer has switches, hosts, and storage. They want to
reduce their Get all Element Details (GAED) times.
Which recommendation should you make?
A. Use segmented replication.
B. Put everything in one discovery group.
C. Use the GAED wizard to reduce the time of each element.
D. Increase the memory of the server to reflect the number of discovery groups.
Answer: A
Hitachi덤프 HH0-280기출문제 HH0-280 HH0-280 HH0-280 dumps
NO.5 A new Hitachi Storage Services Manager (HSSM) customer has provided the following server
specifications to manage 1500 MAPs. Their current configuration is shown below:
-- single 3.0 GHz CPU
-- 2 GB RAM
-- 50 GB hard drive
-- Windows Server 2000 SP1
Which statement is true?
A. Proceed with the installation.
B. Server does not meet the minimum specification.
C. Proceed with the installation using the lite option switches.
D. Split the installation over two servers of the same specification.
Answer: B
Hitachi시험문제 HH0-280 HH0-280 HH0-280 dump HH0-280시험문제
NO.6 In Hitachi Storage Services Manager (HSSM), which two steps are required when discovering a host?
(Choose two.)
A. Provide the administrator password.
B. Provide the IP address of the host to be discovered.
C. Install the appropriate CIM extension on the server you want to manage.
D. Click the Set Default User name and Password link and provide up to three user names and
passwords.
Answer: BC
Hitachi HH0-280 HH0-280자격증
NO.7 A customer has Hitachi USP V, Hitachi AMS, EMC DMX, and HP EVA storage systems attached to
twenty Windows servers and ten Solaris servers.
In this scenario, which two Hitachi Dynamic Link Manager (HDLM) configurations are supported?
(Choose two.)
A. HDLM for UNIX for all storage systems
B. HDLM for Windows for all storage systems
C. HDLM for UNIX for Hitachi storage systems only
D. HDLM for Windows for Hitachi storage systems only
Answer: BC
Hitachi HH0-280인증 HH0-280 HH0-280
NO.8 You have re-installed an existing copy of Hitachi Storage Services Manager (HSSM) on a new server.
The HSSM login screen displays a different Unique Client ID (UCID) to the original and is asking for a
license key.
Which statement is correct?
A. The key is already provided on the installation CD.
B. The key is automatically e-mailed following a successful installation.
C. The previous license key will continue to work for up to 120 days from initial installation.
D. HDS product management must be notified of the new UCID so a new key can be created.
Answer: D
Hitachi HH0-280 HH0-280기출문제 HH0-280
NO.9 A customer is planning a Hitachi Tiered Storage Manager (HTSM) solution.
What are two prerequisites for installing HTSM? (Choose two.)
A. Hitachi 9980v
B. Hitachi USP V
C. Hitachi Tuning Manager
D. Hitachi Device Manager
Answer: BD
Hitachi자료 HH0-280 dump HH0-280기출문제 HH0-280최신덤프
NO.10 A customer has an IBM storage array and is planning to use it as External Storage on the USP V to
migrate an application LUN from external to internal.
Would this migration be disruptive for the application?
A. No, because the customer is using Tiered Storage Manager.
B. No, because the customer has a ShadowImage copy of the LUN.
C. Yes, because the server has to perform a reboot to see the LUN.
D. Yes, because the application must reconfigure the LUN presented by the USP V.
Answer: D
Hitachi HH0-280최신덤프 HH0-280 dump HH0-280 dump
NO.11 A customer is currently using Hitachi Device Manager (HDvM) server with a NIC plugged into a public
LAN. This server also has another NIC attached to a private LAN where the Enterprise and Modular
storage systems under management are located. The server has currently IP forwarding enabled to route
physical view launching by Web clients.
Which proposal will provide a more secure configuration and still allow physical view usage from Web
clients on the public LAN?
A. Add a firewall between the HDvM server and the private LAN; disable IP forwarding.
B. Add a firewall between the HDvM server and the public LAN; disable IP forwarding.
C. Add a firewall between the private and public LANs; remove the private LAN connection from the
HDvM server.
D. Add a firewall between the private and public LANs; remove the public LAN connection from the HDvM
server.
Answer: D
Hitachi인증 HH0-280 pdf HH0-280 HH0-280시험문제
NO.12 You support a customer that will be implementing a Hitachi Device Manager (HDvM) solution. They
plan on using HDvM to manage several USP600s and Adaptable Modular Storage (AMS) systems.
Which statement is correct to manage the AMS systems with HDvM?
A. Storage Navigator is required to use the Physical View.
B. Mapping Guard is required to set up security for the LUNs.
C. Storage Navigator Modular Link and Launch must be set up.
D. Disklock is required to use a lock system for devices accessed from HDvM.
Answer: C
Hitachi자료 HH0-280 HH0-280 dump HH0-280
NO.13 You are installing Hitachi Device Manager for Windows on a network where resources that are to be
managed by the management server are inside a firewall.
What is required for these objects to communicate with the management server?
A. Use the setup utility to add ports to the firewall exceptions list.
B. Configure the firewall to allow these objects to communicate through each port with the management
server.
C. Configure the firewall to allow these objects to communicate through each port with the management
server. Use the setup utility to add ports to the firewall exceptions list.
D. Add the IP addresses of the managed host to the jpchostfile and to the jpchostfile of the Device
Manager Server. Use the setup utility to add ports to the firewall exceptions list.
Answer: B
Hitachi최신덤프 HH0-280 dump HH0-280자료 HH0-280 dump HH0-280 HH0-280기출문제
NO.14 You have a customer that is running Hitachi Device Manager (HDvM) to manage their 9900Vs, USPs,
and Adaptable Modular Storage (AMS) systems. Your customer wants to change the port number used by
all of the AMS systems for TCP/IP communications.
Which two statements are correct? (Choose two.)
A. The port number for the AMS systems cannot be changed.
B. You must use Storage Navigator Modular to change the port setting in the AMS system.
C. You set the new port number in the Services file for the machine where HDvM server is installed.
D. You set the new port number in the Server.Properties file for the machine where HDvM is installed.
Answer: BC
Hitachi HH0-280자격증 HH0-280 dumps HH0-280시험문제 HH0-280 dumps HH0-280
NO.15 Your customer is using Hitachi Device Manager (HDvM) to manage their storage systems. They also
want to provision storage with Hitachi Provisioning Manager.
To allow provisioning of storage, which two tasks must be performed? (Choose two.)
A. Install HDvM agent.
B. Install Provisioning Manager.
C. Install CIM agent extensions.
D. First allocate the host to a Resource group.
Answer: AB
Hitachi덤프 HH0-280 HH0-280 HH0-280
NO.16 In a new installation of Hitachi Storage Services Manager (HSSM) which command is used to install
the Oracle Patch?
A. "orapatch.sql"
B. "orapatch.exe"
C. "installPatch.cmd"
D. "patchupgrade -P -O d:\"
Answer: C
Hitachi최신덤프 HH0-280 HH0-280자료 HH0-280시험문제
NO.17 A customer is deploying a new USP V into the data center across various servers and operating
systems. During the planning stage you identify Hitachi Dynamic Link Manager (HDLM) 5.8 as the
preferred path management software on the AIX servers.
Which three must you include in a prerequisite check list for the deployment? (Choose three.)
A. Check that Hitachi Device Manager (HDvM) agent is not installed.
B. Include additional planning for any Virtual I/O (VIO) servers.
C. Check that the Object Data Manager (ODM) update is installed.
D. Check that Hitachi Device Manager (HDvM) is compatible with HDLM.
E. Check the operating system levels and fix packs against the release notes.
Answer: BCE
Hitachi자격증 HH0-280 HH0-280 dump HH0-280인증 HH0-280
NO.18 Your customer currently has Hitachi Dynamic Link Manager (HDLM) version 4.7 running on ten of their
production servers. They want to simplify the management of running those HDLM instances.
What are two prerequisites for the hosts that are running HDLM to be managed by Hitachi Global Link
Availability Manager (HGLAM)? (Choose two.)
A. Upgrade the HDLM instances to version 5.7 or higher.
B. Install Provisioning Manager agent 3.5 or later on the hosts running HDLM 4.7.
C. Install Hitachi Device Manager agent 3.5 or later on the hosts running HDLM 4.7.
D. Install Hitachi Device Manager agent 3.5 or higher after the upgrade to HDLM 5.2.
Answer: AD
Hitachi자료 HH0-280자료 HH0-280 HH0-280기출문제
NO.19 Your 5 TB Hitachi Dynamic Provisioning (HDP) Pool contains one hundred 50 GB LDEVs and is
running out of space.
Which two statements are correct? (Choose two.)
A. You create a new Pool and concatenate it with the existing Pool.
B. You create new LDEVs out of free space which are used as HDP Pool Volumes to expand your HDP
Pool.
C. You install a new RAID group and create HDP Pool Volumes in this RAID group and add these to your
HDP Pool.
D. You create a new Pool which meets the space requirements and you migrate the Virtual Volumes into
this newly created Pool.
Answer: BC
Hitachi덤프 HH0-280 HH0-280 HH0-280 dumps
NO.20 A customer wants to use Hitachi Dynamic Provisioning (HDP) on a USP V.
Which two statements are true regarding the mapping of Dynamic Provisioning (DP)-Volumes to the
application? (Choose two.)
A. Any LDEV can be used as a DP-Pool Volume.
B. Any type of RAID group is available for DP-Pool Volumes.
C. The size of a DP-Pool is limited by the size of the DP-Pool LDEVs (max 1 TB).
D. The size of a DP-Pool is limited by the number of the DP-Pool LDEVs (max 256).
Answer: BD
Hitachi인증 HH0-280최신덤프 HH0-280시험문제 HH0-280덤프 HH0-280 pdf
ITexamdump의 JK0-U21덤프의 VCE테스트프로그램과 300-206덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP2-K35시험에 대비한 고품질 덤프와 C_TPLM30_66시험 최신버전덤프를 제공해드립니다. 최고품질 642-980시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기