E20-597 덤프 EMC 자격증 덤프

여러분은 우리. ITExamDump의EMC E20-597시험자료 즉 덤프의 문제와 답만 있으시면EMC E20-597인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.

EMC인증 E20-597시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. EMC인증 E20-597시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 EMC인증 E20-597덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 EMC인증 E20-597시험적중율이 최고입니다. EMC인증 E20-597시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.

많은 사이트에서EMC 인증E20-597 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은EMC 인증E20-597시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서

EMC인증E20-597시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는EMC인증E20-597시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 EMC인증E20-597덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

시험 번호/코드: E20-597

시험 이름: EMC (Backup and Recovery Specialist Exam for Storage Administrators)

E20-597 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-597.html

NO.1 What is a characteristic of cloud volumes in EMC NetWorker?
A.Infinitely appendable
B.Recyclable
C.Space cannot be reclaimed.
D.Data cannot be compressed or encrypted.
Answer: A

EMC   E20-597   E20-597시험문제

NO.2 An EMC NetWorker customer wants to perform a complete backup of a SQL server with three
databases. Which save set name should be used?
A.MSSQL:DB
B.MSSQL:*
C.MSSQL:ALLDB
D.MSSQL:
Answer: D

EMC   E20-597   E20-597자료

NO.3 When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service
must be restarted on the client for the change to take effect?
A. nsrd
B. nsrexecd
C. nsrindexd
D. nsrdb
Answer: B

EMC dumps   E20-597자격증   E20-597 dump   E20-597   E20-597   E20-597

NO.4 What is a characteristic of how the EMC NetWorker modules integrate with native applications?
A. The developer of the native application provides a NetWorker module to allow for protection of their
application with NetWorker.
B. The NetWorker module runs on the NetWorker server and acts as an intermediary for data coming
from the NetWorker client module.
C. The NetWorker module acts as an intermediate layer between NetWorker and the native application.
D. The NetWorker module always takes the place of the standard NetWorker client allowing for backup of
applications and file systems.
Answer: C

EMC   E20-597덤프   E20-597덤프

NO.5 Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Requestor
B. Provider
C. Writer
D. Interceptor
Answer: B

EMC   E20-597   E20-597   E20-597인증   E20-597

NO.6 What is a characteristic of VCB backups in EMC NetWorker?
A.Supports image and file-based backups
B.Requires a NetWorker client on each virtual machine
C.Requires a storage node on the VCB backup proxy
D.Does not support LAN-free backup
Answer: A

EMC인증   E20-597   E20-597자료

NO.7 You have successfully configured three SQL servers for backup with the EMC NetWorker Module for
SQL. These servers are configured as follows:
Scheduled backup of the group shows that all SQL data from the three servers was successfully backed
up. However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you
only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Modify the browse time within the NetWorker user GUI to show the period for which you want to
recover.
B. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
C. Modify the save set to include an instance or database name after MSSQL:.
D. Launch the NetWorker User for SQL.
Answer: D

EMC최신덤프   E20-597   E20-597시험문제   E20-597자료   E20-597자료

NO.8 A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk
Library. To ensure that the embedded storage node is used to read the data during clone operations, what
is required?
A.Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.
B.Set the clone storage node value for the embedded storage node client resource to itself.
C.Create a client for the embedded storage node.
D.Create a clone pool and assign the appropriate rights to it.
Answer: A

EMC최신덤프   E20-597 dumps   E20-597기출문제

NO.9 What is the backup command specified in the EMC NetWorker client resource for EMC Centera
backups?
A.savepnpc
B.nsrdasv
C.nsrndmp_save
D.nsrsnap_vss_save.exe
Answer: C

EMC   E20-597기출문제   E20-597   E20-597 pdf

NO.10 Refer to the exhibit. An EMC NetWorker customer has two data zones, A and B, with autochanger AC1
and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is
configured as a shared autochanger.
Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
A. 2
B. 0
C. 4
D. 6
Answer: B

EMC덤프   E20-597   E20-597

NO.11 You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives.
Two drives each are dedicated to the server and storage node. A new Celerra has been added to the
network with 500 GB of data. What must be done to back up the data on the Celerra?
A. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.
B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this
device.
C. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or
storage node.
D. Create an NDMP backup pool and add this pool to a save group with other clients.
Answer: C

EMC dumps   E20-597   E20-597자료   E20-597최신덤프   E20-597

NO.12 A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving
the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96.?
A. Set device max sessions to 96.
B. Configure group parallelism to 96.
C. Enable diagnostic mode.
D. Add NetWorker Storage Node Enabler Code.
Answer: D

EMC자격증   E20-597   E20-597

NO.13 Refer to the exhibit. In an EMC NetWorker environment, the storage node sn1 is down for maintenance.
According to the client properties, what happens when the backup of the client starts?
A. The backup data will be sent to the storage node sn2.
B. The backup will fail as the storage node sn1 is not available.
C. The backup data will be sent to any available storage node.
D. The backup data will be sent to the NetWorker server.
Answer: A

EMC기출문제   E20-597 dumps   E20-597인증   E20-597최신덤프

NO.14 What is a characteristic of EMC NetWorker SnapImage module backups?
A.Block-level backups of dense file systems
B.Fast block-level backups of a file system mounted on a proxy server
C.Immediate recovery of a file system from a persistent snapshot
D.SAN-based image-level backup and recovery of file systems
Answer: A

EMC dump   E20-597인증   E20-597   E20-597

NO.15 A customer has the following EMC NetWorker configuration:
How many nsrlcpd processes are running on the NetWorker server?
A. 4
B. 12
C. 16
D. 0
Answer: D

EMC   E20-597   E20-597최신덤프   E20-597   E20-597

ITExamDump는EMC인증E20-597시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에EMC인증E20-597시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.EMC인증E20-597시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.