ITExamDump 에서는 최선을 다해 여러분이IBM 000-017인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서IBM 000-017덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로IBM 000-017인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.
IBM인증 000-017시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. IBM인증 000-017시험을 패스하려면 ITExamDump의IBM인증 000-017덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. IBM인증 000-017덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.
거침없이 발전해나가는 IT업계에서 자신만의 자리를 동요하지 않고 단단히 지킬려면IBM인증 000-017시험은 무조건 패스해야 합니다. 하지만IBM인증 000-017시험패스는 하늘에 별따기 만큼 어렵습니다. 시험이 영어로 출제되어 공부자료 마련도 좀 힘든편입니다. 여러분들의 고민을 덜어드리기 위해ITExamDump에서는IBM인증 000-017시험의 영어버전 실제문제를 연구하여 실제시험에 대비한 영어버전IBM인증 000-017덤프를 출시하였습니다.전문적인 시험대비자료이기에 다른 공부자료는 필요없이ITExamDump에서 제공해드리는IBM인증 000-017영어버전덤프만 공부하시면 자격증을 딸수 있습니다.
시험 번호/코드: 000-017
시험 이름: IBM (Foundations of Tivoli process automation engine V7.1)
ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한IBM인증000-017시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리IBM인증000-017덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.
000-017 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-017.html
NO.1 Which two data elements are required to configure a Conditional user interface Control? (Choose two.)
A.Domain
B.Person Group
C.Object Structure
D.Signature Option
E.Conditional Expression
Answer: DE
IBM 000-017 dump 000-017최신덤프
NO.2 A client has a workflow requirement on new asset records. Part of this requirement is that the
Contracts representatives from the Lease and Warranty groups review and validate contracts the asset
may or may not be under. The asset record cannot move to the next part of the workflow process until all
assignments are completed.
Which data elements and actions can be used to configure this part of the workflow process?
A.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when all assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an action that Leasing and Warranty Contracts
have been reviewed and this asset is under a contract. Configure the Negative connection line coming
from this Task node to indicate an action that Leasing and Warranty Contracts have been reviewed and
this asset is not under a contract.
B.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when all assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
C.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when any assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an instruction that indicates that Leasing and
Warranty Contracts have been reviewed and this asset is under a contract. Configure the Negative
connection line coming from this Task node to indicate an instruction that Leasing and Warranty Contracts
have been reviewed and this asset is not under a contract.
D.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when any assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
Answer: B
IBM dumps 000-017 000-017 pdf
NO.3 Which factor would normally be considered when developing a primary location hierarchy?
A.the financial relationship between locations
B.the functional relationship between locations
C.the geophysical relationship between locations
D.the organizational relationship between locations
Answer: C
IBM 000-017 000-017 dump 000-017자료
NO.4 When the agent saves the service request ticket, the system launches into a Service Request
Workflow process and evaluates the data on the record. If the agent has not entered asset, location, or
configuration item data, the system displays a dialog box with the following options:
Close ticket - informational call
Close ticket - unauthorized caller
Close ticket - misdirected call
Take no action
If an asset, location, or configuration item is specified on the record, the system displays a dialog box with
the following options:
Take Ownership of ticket
Assign Ownership of ticket
Create Work Order
Take no action on this ticket
Which three Nodes are used in this part of the workflow process? (Choose three.)
A.Wait
B.Input
C.Task
D.Condition
E.Interaction
F.Manual Input
Answer: DEF
IBM 000-017 dump 000-017인증 000-017 000-017 000-017
NO.5 A pharmaceutical company has made a tremendous number of configurations in their development
environment in order to meet their business requirements and the government regulations. The company
is ready to move 25% of these configurations into the test environment.
How should this be accomplished?
A.Export the XML and then import it again as appropriate into the test environment.
B.All of the configurations must be brought over. It is impossible to define only 25% of the configurations.
C.A package of the appropriate configurations should be defined and created. It should be distributed and
then deployed into the test environment.
D.Create a package of the appropriate configurations. Then use the Integration Framework to export
those configurations. Finally, use the Integration Framework to import the configurations into the Test
environment again.
Answer: C
IBM pdf 000-017 dumps 000-017인증
NO.6 Which function is performed when enabling Application Server security during the installation?
A.configuring Database Server to use Application Server security
B.configuring the Tivoli process automation engine application so that it handles authorizations to use the
application
C.modifying the J2EE application so that authentication will be handled by an external source such as
IBM Tivoli Directory Server or Microsoft Active Directory
D.modifying the Tivoli process automation engine application so that authentication is handled through
the application rather than an external source such as IBM Tivoli Directory Server or Microsoft Active
Directory
Answer: C
IBM자료 000-017 000-017 000-017자격증 000-017시험문제
NO.7 Which property must be specified in maximo.properties?
A.mxe.db.user
B.mxe.rmi.port
C.mxe.http.port
D.mxe.UserLicenseKey
Answer: A
IBM dump 000-017 000-017 dumps 000-017기출문제
NO.8 A business requires the blocking of status changes when a work order record is in workflow, unlocking
at a certain point to perform a status change to APPR, and then relocking when the status change occurs.
Leveraging the workflow tool, what are the necessary data elements and steps to meet this requirement?
A.On the workflow connector line where the status block is to begin use the NOSTATUS action. To unlock
the status change block, prior to the next status change, on a connector line use the OKSTATUS action.
B.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line where the status block is to begin
use the NOSTATUS action. To unlock the status change block, prior to the next status change, on a
connector line use the OKSTATUS and WOAPPR actions.
C.In the Actions application, create an Action Group for the work order object with the following members
in the following order: OKSTATUS, Work Order Approval action, NOSTATUS. On the workflow connector
line where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior
to the next status change, on a connector line use the Action Group.
D.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. Create an Action Group for the work order object with the following
members in the following order: OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line
where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior to the
next status change, on a connector line use the Action Group.
Answer: C
IBM pdf 000-017최신덤프 000-017 dump
NO.9 Which configuration option should be set when creating an escalation?
A.any related notifications to the escalation
B.the severity of the event that will be created
C.pager numbers in a comma-separated list in the escalation
D.the Peregrine or Remedy queue in which the escalation is placed
Answer: A
IBM 000-017기출문제 000-017 000-017 dump
NO.10 Which statement is true about the Conditional Expression Manager?
A.It creates and stores libraries of SQL statements.
B.It dynamically assigns a user to a Security Group based on a condition.
C.It controls workflow paths automatically when certain users are involved.
D.It creates conditions for group membership to automatically associate users into groups.
Answer: A
IBM 000-017 000-017덤프
NO.11 Which type of domain has an internal value?
A.Table
B.Numeric
C.Synonym
D.Crossover
Answer: C
IBM 000-017 000-017자료 000-017 000-017 000-017
NO.12 A customer wants to ensure that any data sent to the Tivoli process automation engine's Integration
Framework for retrieval of financial data into the Tivoli process automation engine can survive restarts
and failures.
Which statement is true?
A.A JMS messaging engine must be configured with a persistent data store.
B.The customer must have the persist data option set for the Integration Framework adapter.
C.It can be configured by setting a property inside the Tivoli process automation engine after installation.
D.The messages are stored local to the adapter and will survive failures without any additional
configuration.
Answer: A
IBM 000-017 000-017시험문제 000-017 dumps 000-017 pdf 000-017
NO.13 When defining Security Groups which parameters can be specified?
A. Users, Sites, Applications and Storerooms
B. Storerooms, Group, Person and Applications
C. Users, Security, Data Restrictions and Access Rights
D. Permissions, Applications, Locations and Departments
Answer: A
IBM dump 000-017 000-017기출문제 000-017
NO.14 Which three workflow application actions (APPACTION) can only be used in conjunction with an
Escalation and the WFASSIGNMENT object? (Choose three.)
A.WFAUTO
B.WFCOND
C.WFREJECT
D.WFINITIATE
E.WFACCEPT
F.WFESCALATE
Answer: CEF
IBM 000-017 000-017 000-017
NO.15 Which two types of condition can be created using the Conditional Expression Manager? (Choose
two.)
A.class
B.unique
C.universal
D.expression
E.conditional
Answer: AD
IBM dumps 000-017 dumps 000-017 000-017 000-017 000-017 dump
NO.16 Which type of domain cannot have a Lookup created for it?
A.Table
B.Numeric
C.Synonym
D.Numeric Range
Answer: D
IBM 000-017 000-017
NO.17 Which method is used to validate the escalation being created?
A.Choose the Select action for Validate.
B.There is no validation of the escalation.
C.Save the escalation. Validation is automatic.
D.Click the Action button, which resembles a green check mark.
Answer: A
IBM 000-017최신덤프 000-017기출문제 000-017최신덤프 000-017기출문제
NO.18 What does the Schedule field refer to when creating an escalation?
A.the schedule by which the escalation will poll for conditions
B.the scheduled working hours of the escalation response team
C.the scheduled days of the week for which the escalation path is valid
D.a scheduled timer that is set when the condition checked by the escalation change, after which the
escalation fires
Answer: A
IBM 000-017최신덤프 000-017 000-017인증 000-017
NO.19 The property mxe.rmi.port can be found in maximo.properties and by the System Properties
application.
If mxe.rmi.port is set to 0 in the properties file, and is set to 1090 from the System Properties application,
which statement is true about this property?
A.This property value cannot be set to 0 in the properties file. Therefore, the value must be 1090.
B.The Tivoli process automation engine terminates with an error on startup because the two settings are
not consistent.
C.The value in the Tivoli process automation engine properties overrides the value found in the properties
file. So the property value would be 1090.
D.The value in the properties file overrides the value found when viewing Tivoli process automation
engine properties, so the property value would be 0.
Answer: D
IBM 000-017덤프 000-017자료 000-017 000-017 000-017
NO.20 When creating a new escalation, what is the most likely reason that the conditional SQL Expression
Builder does not list attributes to use?
A.An object has not been linked in the Applies To field.
B.The escalation has not been linked to an existing attribute.
C.The Create Condition Entry Disabled check box is selected.
D.The escalation has not been linked to an existing application.
Answer: A
IBM 000-017 000-017최신덤프 000-017 pdf
IT업계에 종사하고 계시나요? 최근 유행하는IBM인증 000-017 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 IBM인증 000-017덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 IBM인증 000-017덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?
댓글 없음:
댓글 쓰기