2014년 6월 19일 목요일

Hp2-B29시험문제, HP0-Y49 Dump

HP인증 Hp2-B29시험은 멋진 IT전문가로 거듭나는 길에서 반드시 넘어야할 높은 산입니다. HP인증 Hp2-B29시험문제패스가 어렵다한들ITExamDump덤프만 있으면 패스도 간단한 일로 변경됩니다. ITExamDump의HP인증 Hp2-B29덤프는 100%시험패스율을 보장합니다. HP인증 Hp2-B29시험문제가 업데이트되면HP인증 Hp2-B29덤프도 바로 업데이트하여 무료 업데이트서비스를 제공해드리기에 덤프유효기간을 연장해는것으로 됩니다.

ITExamDump는 오래된 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump의 HP인증 HP0-Y49덤프는 업계에서 널리 알려진 최고품질의HP인증 HP0-Y49시험대비자료입니다. HP인증 HP0-Y49덤프는 최신 시험문제의 시험범위를 커버하고 최신 시험문제유형을 포함하고 있어 시험패스율이 거의 100%입니다. ITExamDump의HP인증 HP0-Y49덤프를 구매하시면 밝은 미래가 보입니다.

IT업계 종사자라면 누구나 HP 인증Hp2-B29시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? HP 인증Hp2-B29 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테HP 인증Hp2-B29시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의HP 인증Hp2-B29시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

시험 번호/코드: Hp2-B29
시험 이름: Consulting on HP PrintingSolutions
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 Hp2-B29자격시험
100% 합격율 보장
Q&A: 60 문항 Hp2-B29최신덤프
업데이트: 2014-06-18

Hp2-B29자격시험: >>펼쳐보기

시험 번호/코드: HP0-Y49
시험 이름: HP ATP FlexNetwork Solutions
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 HP0-Y49 dump
100% 합격율 보장
Q&A: 65 문항 HP0-Y49기출문제
업데이트: 2014-06-18

HP0-Y49 dump: >>펼쳐보기

HP인증 HP0-Y49시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 HP인증 HP0-Y49시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의HP인증 HP0-Y49덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.

ITExamDump의 HP인증 Hp2-B29시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 HP인증 Hp2-B29덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. HP인증 Hp2-B29시험을 통과하여 자격증을 취득하려면ITExamDump의 HP인증 Hp2-B29덤프로 시험준비공부를 하세요.

최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 HP인증 HP0-Y49덤프는IT인증시험의 한 과목인 HP인증 HP0-Y49시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.

HP0-Y49 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y49.html

NO.1 A network administrator executes these commands on an HP Comware switch:
[Comware] super password level 1 simple hp1 [Comware] super password level 2 simple hp2
[Comware] super password level 3 simple hp3 [Comware] quit <Comware>
The network administrator then executes this command to test the configuration: <Comware>
super 0
What is the outcome of the configuration?
A. The network administrator is immediately placed into Monitor view.
B. Access is denied because no level 0 password has been defined.
C. A password of hp0 must be entered to access the view.
D. The network administrator is immediately placed into visitor view.
Answer: D

HP시험정보   HP0-Y49   HP0-Y49덤프

NO.2 When LLDP is enabled, which value is presented by default as the LLDP Chassis ID on both
ProVision and Comware switches?
A. Router ID
B. System Name
C. IP address
D. MAC address
Answer: D

HP자격시험   HP0-Y49   HP0-Y49 IT자격증시험자료   HP0-Y49 PDF
Explanation:
<Sysname> display lldp local-information
Global LLDP local-information: Chassis ID : 00e0-fc00-5600 System name : Sysname System
description : H3C Comware Software. H3C S12508 Product Version S12500-C
MW710-B01BBIT25. Copyright (c) 2004-2011 Hangzhou H3C Tec
h. Co., Ltd. All rights reserved. System capabilities supported : Bridge, Router System capabilities
enabled : Bridge, Router
MED information: Device class : Connectivity device MED inventory information of master board:
HardwareRev : REV.A FirmwareRev : 109 SoftwareRev : 5.20 Alpha 2101 SerialNum : NONE
Manufacturer name : H3C Model name : H3C Comware Asset tracking identifier : Unknown
Table 1 Command output Field Description Global LLDP local-information Global LLDP information
to be sent. Chassis ID Bridge MAC address of the device.
Reference:
http://www.h3c.com/portal/Technical_Support___Documents/Technical_Documents/Switch
es/H3C_S12500_Series_Switches/Command/Command/H3C_S12500_CR-Release71286W710/ 04 / 20
1301 /772500_1285_0.htm
4. Refer to the exhibit. Exhibit: Network topology
The server shown in the exhibit is configured for dynamic LACP . There is only one link between
Switch 1 and Switch 2. Which HP switching solution should the network administrator implement?
A. Distributed trunking on Comware Switches or ProVision switches
B. IRF on Comware switches or Provision switches
C. IRF on Comware switches or but not on ProVision switches
D. Distributed trunking on ProVision switches but not on Comware switches
Answer: C

HP   HP0-Y49시험문제   HP0-Y49인증덤프   HP0-Y49시험일정
5. Which open standard allows a switch with PoE support to correctly determine the power
requirements of a connected device?
A. ICMP
B. AutoPower
C. LLDP-MED
D. CDP
Answer: C

HP IT덤프   HP0-Y49 IT시험덤프   HP0-Y49자격증
Explanation:
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet
Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on
an IEEE 802 local area network, principally wired Ethernet. Media Endpoint Discovery is an
enhancement of LLDP , known as LLDP-MED, that provides the following facilities:
- Auto-discovery of LAN policies (such as VLAN, Layer 2 Priority and Differentiated services settings)
enabling plug and play networking. - Device location discovery to allow creation of location
databases and, in the case of Voice over Internet Protocol (VoIP), Enhanced 911 services. - Extended
and automated power management of Power over Ethernet (PoE) end points.
6. Which HP solution delivers automated virtual machine orchestrator, automatic
synchronization of network connectivity information, and visibility to performance of wired and
wireless users?
A. Unified Wired-WLAN modules and switches
B. Intelligent Management Center (IMC)
C. Virtual Connect FlexFabric
D. Intelligent Resilient Framework
Answer: B

HP덤프   HP0-Y49 IT자격증시험   HP0-Y49자격증신청
Reference: http://h17007.www1.hp.com/docs/mark/ 4AA3-4496ENW.pdf
7. Which HP Intelligent Management Center (IMC) component would a network administrator
check to verify the installation of IMC or an add-on module?
A. Deployment Monitoring Agent
B. Deployment Analyzer
C. Service Manager
D. Process Manager
Answer: A

HP최신덤프   HP0-Y49 Dumps   HP0-Y49시험문제
8. Which HP Comware component allows a network administrator to adjust the logging process?
A. SNMP management center
B. Information center
C. Logging process
D. System logging center
Answer: B

HP IT자격증시험자료   HP0-Y49 IT덤프   HP0-Y49최신버전덤프   HP0-Y49 PDF
Explanation:
Acting as the system information hub, information center classifies and manages system
information, offering a powerful support for network administrators and developers in
monitoring network performance and diagnosing network problems.
The following describes the working process of information center:
- Receives the log, trap, and debugging information generated by each module. - Outputs the above
information to different information channels according to the user-defined output rules. - Outputs
the information to different destinations based on the information channel-to-destination
associations.
9. Two OSPF routers are on a segment, and both of their interfaces become active. What is the
initial OSPF state after an adjacency has formed?
A. Established
B. Exstart
C. Two-way
D. Full
Answer: B

HP자료   HP0-Y49응시료   HP0-Y49 IT자격증   HP0-Y49
10. What does an IP host learn from an ARP reply?
A. An IP address
B. The local subnet
C. A MAC address
D. A Netbios name
Answer: C

HP자료   HP0-Y49자격시험   HP0-Y49 IT시험덤프   HP0-Y49시험일정

NO.3 Which command can a network administrator execute to manage configuration files on an HP
Comware switch?
A. Write file
B. Startup-default
C. Delete
D. Write memory
Answer: C

HP자격증시험   HP0-Y49   HP0-Y49 Dumps   HP0-Y49   HP0-Y49자격증

댓글 없음:

댓글 쓰기