Microsoft인증사에서 주췌하는 MB4-643시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. ITExamDump에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. ITExamDump덤프로 자격증취득의 꿈을 이루세요.
ITExamDump의 덤프선택으로Microsoft MB4-643인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.
우리ITExamDump에서는 각종IT시험에 관심있는분들을 위하여, 여러 가지 인증시험자료를 제공하는 사이트입니다. 우리ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공할수록 도와주는 사이트입니다. 우리의 파워는 아주 대단하답니다. 여러분은 우리ITExamDump 사이트에서 제공하는Microsoft MB4-643관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해봄으로 우리에 믿음이 생기게 될 것입니다.
시험 번호/코드: MB4-643
시험 이름: Microsoft (SL 7.0 Inventory and Order Processing)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2013-12-15
ITExamDump의 Microsoft인증 MB4-643시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 Microsoft인증 MB4-643덤프가 신뢰성을 다시 한번 인증해주는것입니다. Microsoft인증 MB4-643시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 Microsoft인증 MB4-643덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
많은 사이트에서Microsoft 인증MB4-643 인증시험대비자료를 제공하고 있습니다. 그중에서 ITExamDump를 선택한 분들은Microsoft 인증MB4-643시험통과의 지름길에 오른것과 같습니다. ITExamDump는 시험에서 불합격성적표를 받으시면 덤프비용을 환불하는 서
IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Microsoft인증 MB4-643덤프로Microsoft인증 MB4-643시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
다른 사이트에서도Microsoft MB4-643인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ITExamDump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ITExamDump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ITExamDump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.
MB4-643 덤프무료샘플다운로드하기: http://www.itexamdump.com/MB4-643.html
NO.1 In the following predefined order types, which don't affect inventory balances (choose more than one)
A.Quote
B.Invoice
C.Credit Memo
D.Sales Order
Answer:A C
Microsoft dumps MB4-643 pdf MB4-643 MB4-643자격증 MB4-643 dump MB4-643
NO.2 A Freight Term with three detail lines is set up. Line 1 has a Minimum Order Value = 0 and Percent of
Freight Cost = 100 Line 2 has a Minimum Order Value = 100.01 and a Percent of Freight Cost = 50 Line 3
has a Minimum Order Value = 1000.01 and a Percent of Freight Cost = 0. Which of the following
describes this example? (choose more than one)
A.The customer is charged the total cost of freight if the invoice amount is $100.00 or under.
B.The customer is not charged for any of the cost of freight if the invoice amount is over $1000.01.
C.The customer is charged 1/2 of the total cost of freight if the invoice amount is between $100.01 and
$1000.00.
Answer:A B C
Microsoft dump MB4-643자료 MB4-643 MB4-643
NO.3 At which level of detail is the average cost found when cost of goods sold is calculated for the sales of
average cost items?
A.Inventory Site
B.Inventory Item
C.Warehouse Bin Location
D.The value in the Cost of Goods Sold Subaccount Source field in the IN Setup screen
Answer:A
Microsoft MB4-643 pdf MB4-643자료
NO.4 The Release IN Batches screen in the Inventory module only displays batches that have which of the
following statuses? (choose more than one)
A.Hold
B.Unposted
C.Balanced
D.Partially Released
Answer:C D
Microsoft MB4-643기출문제 MB4-643 dumps MB4-643자료
NO.5 A client may activate the Customer Priority Scheduling feature in Microsoft Dynamics SL, what are the
reasons for this? (choose more than one)
A.The client wants to perform the quantity availability calculations manually.
B.The ability to reserve inventory items for higher priority customers is needed.
C.The ability to determine which orders receive product when an item is oversold is needed.
D.The client wants to include all work orders from the Work Order module in the inventory availability
calculation
Answer:B C
Microsoft덤프 MB4-643기출문제 MB4-643 MB4-643자료
NO.6 In order to turn an inventory item into a kit, what must be done to achieve this?
A.Give the item at least one component in the Kits screen.
B.Associate the Kit Inventory Class to the inventory item.
C.Create an assembly plan for the kit in the Assembly Plans screen
D.Open the Inventory Items screen and change the Kit Type field from blank to Kit
Answer:A
Microsoft시험문제 MB4-643 MB4-643
NO.7 In the Kit Assembly screen of the Inventory module, which functions can be performed(choose more
than one)
A.Assemble Stock Kits
B.Assemble Non-stock Kits
C.If the Allow Non-Component Assembly field in IN Setup is checked, items not originally a component of
the kit can be added to the kit.
D.If the Verify Quantity field in the Inventory Item screen for the Kit is checked, items not originally a
component of the kit can be added to a kit.
Answer:A C
Microsoft pdf MB4-643 MB4-643 MB4-643 MB4-643
NO.8 In order to default the sales account and subaccount from the Customer Maintenance screen, which of
the following wildcard characters in the Order Types screen is used to achieve this?
A.IC
B.SH
C.CU
D.MI
Answer:C
Microsoft MB4-643 MB4-643덤프 MB4-643 dumps
NO.9 How are inventory quantities affected when a return of a stock kit is processed?
A.Because a return of kit items is not allowed in the Inventory module, inventory quantities are not
affected.
B.The quantities of the kit component items are increased based on the definition of the kit at the time that
the kit was assembled.
C.The quantities for the kit inventory item are increased, the return has no effect on any of the component
item quantities or costs.
D.The quantities of the kit component items are increased based on the definition of the kit at the time that
the return of the kit is processed
Answer:C
Microsoft최신덤프 MB4-643 MB4-643 MB4-643
NO.10 Which inventory valuation method is used to maintain cost layers for items based on receipt date?
A.FIFO
B.Average Cost
C.User-Specified Cost
D.Specific Identification
Answer:A
Microsoft시험문제 MB4-643 MB4-643 MB4-643 pdf MB4-643 dumps MB4-643기출문제
NO.11 In order to default the Inventory Site ID during data entry, what are the possible methods that can be
selected in Order Management Setup for doing this? (choose more than one)
A.Item
B.User
C.Inventory Setup
D.Customer Ship-to Address
Answer:A B D
Microsoft dumps MB4-643최신덤프 MB4-643 MB4-643
NO.12 Which of the following freight terms can not be set up to calculate the customer freight charge
automatically?
A.Calculate the freight cost as a flat currency amount for an order.
B.Calculate freight cost based on a percentage of the invoice amount.
C.Calculate freight cost based on a percentage of the actual freight costs.
D.Calculate freight costs based on the distance between the site the inventory is being shipped from and
ship-to address on the order.
Answer:C
Microsoft기출문제 MB4-643 MB4-643
NO.13 Which line types create a customer invoice in the Accounts Receivable module when you use the
Issues screen in the Inventory module?
A.Issue
B.Return
C.Invoice
D.The Issues screen cannot be used to update customer balances
Answer:D
Microsoft MB4-643인증 MB4-643기출문제 MB4-643덤프
NO.14 Unit Conversions can be set up and used for which of the following? (choose more than one)
A.Specific product line
B.Specific product class
C.Specific inventory item
D.Global - All inventory items
Answer:B C D
Microsoft자격증 MB4-643 MB4-643자료 MB4-643덤프 MB4-643인증
NO.15 Which of the following can prevent a user from entering and releasing a transfer batch? (choose more
than one)
A.The location to which the inventory is being transferred has the Receipts Allowed option set to No
Receipts Allowed.
B.The To Warehouse Bin Location has not been set up, and the Warehouse Bin Location Validation field
in IN Setup is set to None.
C.Inventory is set up to disallow negative inventory and there is insufficient quantity for the item in the
From Warehouse Bin Location.
D.The To Warehouse Bin Location has not been set up, and the Warehouse Bin Location Validation field
in IN Setup is set to Warning But Add to Table.
Answer:A C
Microsoft시험문제 MB4-643 MB4-643 MB4-643
NO.16 At what level are Physical Attribute Definitions such as Style, Size, and Color defined?
A.ABC Codes
B.Product Lines
C.Movement Classes
D.Product Classes
Answer:D
Microsoft MB4-643 MB4-643 MB4-643
NO.17 You're the administrator of your company sales department, you're in charge of the sales department.
Now you have to process direct billing, record sales "after the fact," and record orders for items that have
already been shipped to the customer but not recorded in Microsoft Dynamics SL, so which predefined
order type can you use to achieve these goals?
A.Invoice
B.Will Call
C.Debit Memo
D.Sales Order
Answer:A
Microsoft pdf MB4-643인증 MB4-643 dumps MB4-643덤프
NO.18 In the following items, which are controlled by the Order Types set up in the Order Management
module? (choose more than one)
A.How many shippers can be created for a given order.
B.How an order processes through its life cycle in the Order Management module.
C.Accounting interaction with the Accounts Receivable and the Inventory modules.
D.Set General Ledger Account and Subaccount numbers to be used during processing.
Answer:B C D
Microsoft덤프 MB4-643 MB4-643 MB4-643인증
NO.19 A client wants to perform a partial physical count on a group of items that are not based on the cost or
sales activity of the inventory items. Which of the physical inventory fields on the Physical Cycle tab in the
Inventory Items screen can be used to meet the needs of this client?
A.Cycle ID
B.ABC Code
C.Product Class
D.Movement Class
Answer:A
Microsoft덤프 MB4-643 MB4-643 MB4-643 dump
NO.20 Which feature in the Inventory module can be used to associate characteristics to inventory items for
searching purposes?
A.ABC Codes
B.Product Classes
C.Physical Cycles
D.Physical Attributes
Answer:D
Microsoft MB4-643덤프 MB4-643기출문제 MB4-643시험문제
ITexamdump의 1z0-559덤프의 VCE테스트프로그램과 MB7-701덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 CAT-221시험에 대비한 고품질 덤프와 VCP510PSE시험 최신버전덤프를 제공해드립니다. 최고품질 000-224시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기