인재도 많고 경쟁도 많은 이 사회에, IT업계인재들은 인기가 아주 많습니다.하지만 팽팽한 경쟁률도 무시할 수 없습니다.많은 IT인재들도 어려운 인증시험을 패스하여 자기만의 자리를 지키고 있습니다.우리ITExamDump에서는 마침 전문적으로 이러한 IT인사들에게 편리하게 시험을 패스할수 있도록 유용한 자료들을 제공하고 있습니다.
우리 ITExamDump사이트에서 제공되는Adobe인증9A0-096시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에Adobe인증9A0-096시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.
시험 번호/코드: 9A0-096
시험 이름: Adobe (Adobe AfterEffects CS4 Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 143 문항
업데이트: 2013-11-17
ITExamDump는 여러분이 빠른 시일 내에Adobe 9A0-096인증시험을 효과적으로 터득할 수 있는 사이트입니다.Adobe 9A0-096덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서Adobe 9A0-096관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의Adobe 9A0-096덤프로 자신 있는 시험준비를 하세요.
ITExamDump 에서 출시한 Adobe인증9A0-096시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한Adobe인증9A0-096덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로ITExamDump제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.
Adobe인증 9A0-096시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고ITExamDump를 찾아주세요. ITExamDump의Adobe인증 9A0-096덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. ITExamDump의Adobe인증 9A0-096덤프는Adobe인증 9A0-096실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Adobe인증9A0-096시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Adobe인증9A0-096덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
Adobe인증9A0-096시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로Adobe인증9A0-096시험준비를 잘하시면 100%Adobe인증9A0-096시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은Adobe인증9A0-096시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.
9A0-096 덤프무료샘플다운로드하기: http://www.itexamdump.com/9A0-096.html
NO.1 Click the Exhibit button.
You are working in a composition that has the two layers shown in the exhibit. Layer 1 has a mask applied
to it. You wish to animate the position of Layer 2 using the mask path coordinates from Layer 1.
What is the most efficient process?
A. select Layer 2, then use the Parent drop-down menu option next to the layer in the timeline to set its
parent layer to Layer 1
B. select Layer 1, open the Mask attributes in the timeline, select the Mask Path and go to Edit > Copy,
then select Layer 2 and go to Edit > Paste
C. select Layer 1, open the Mask attributes in the timeline, select the Mask Path and go to Edit > Copy,
then select Layer 2, open the Transform attributes, select the Position property, and go to Edit > Paste
D. open the Mask attributes for Layer 1 in the timeline, select Layer 2, open its Transform attributes, and
set an expression for the Position by pressing Option/ALT and clicking the stopwatch, then drag the pick
whip icon onto the Mask Path of Layer 1
Answer: C
Adobe최신덤프 9A0-096 9A0-096 dump 9A0-096 9A0-096시험문제
NO.2 How can you find out the number vertices of a mask?
A. select the mask in the timeline and look in the Info panel
B. select the mask in the timeline, open the Mask properties and look under Mask Path
C. select the mask in the Composition panel, right-click on it, select Mask and select Vertices at the
bottom of the menu
D. select the mask in the Composition panel, go to Layer > Mask > Mask Shape to bring up the Mask
Shape dialog box containing the vertices information
Answer: A
Adobe dumps 9A0-096기출문제 9A0-096시험문제
NO.3 When previewing an After Effects composition that contains several nested compositions, a Timeline
panel different from the current Composition panel plays.
What is causing this scenario?
A. The Timeline panel is locked.
B. The Composition panel is locked.
C. The Maximize Frame command has been enabled for the Timeline panel.
D. The Maximize Frame command has been enabled for the Composition panel.
E. You have selected a nested composition in the Timeline panel with the mouse before previewing.
Answer: B
Adobe최신덤프 9A0-096 9A0-096자료 9A0-096
NO.4 In the Paint panel, what does the Flow attribute affect?
A. the maximum amount of paint applied
B. how quickly paint is applied or removed
C. the ratio between the short and long axes of a brush
D. how pixels in the underlying image are blended with the pixels painted
Answer: B
Adobe 9A0-096 9A0-096 9A0-096
NO.5 How can you recognize the vertex designated as the first vertex of a path?
A. It appears as corner point in the Composition viewer.
B. It appears as the top-most vertex in the Composition panel.
C. It appears slightly larger than the other vertices in the Composition panel.
D. It appears as vertex #1 in the Info panel when that mask vertex is selected in the Composition viewer.
Answer: C
Adobe 9A0-096 9A0-096 9A0-096
NO.6 How do you undo a change and all changes after it?
A. choose File > Revert
B. choose Edit > Undo [action]
C. choose Edit > History, and select the last change that you wish to undo
D. choose Edit > History, and select the first change that you wish to undo
Answer: D
Adobe 9A0-096 9A0-096기출문제 9A0-096 dumps 9A0-096
NO.7 You have a composition containing two layers. The bottom layer in the Timeline panel contains a map.
The top layer in the Timeline panel is comprised of a Shape Layer with a stroked pen path. You wish to
wipe on the stroked pen path with a Shape Layer path operator to follow a road on the bottom layer.
What lets you simulate an animated line on the Shape Layer?
A. Zig Zag
B. Repeater
C. Trim Paths
D. Offset Paths
E. Wiggle Paths
Answer: C
Adobe 9A0-096자격증 9A0-096 9A0-096 dump 9A0-096 dumps
NO.8 You would like to animate the Fill and Stroke properties for a Text Layer in a composition.
Which option in the Timeline panel lets you keyframe the Fill and Stroke properties for a Text Layer?
A. Transform
B. Source Text
C. Path Options
D. Inter-Character Blending
Answer: B
Adobe최신덤프 9A0-096 9A0-096 9A0-096 dump 9A0-096인증 9A0-096인증
NO.9 Which action lets you motion sketch an animation with the Puppet Pin tool?
A. drag a Deform pin with the Puppet Pin tool
B. place Deform pins at different points in time in the Composition panel
C. place Puppet Overlap pins at different points in time in the Composition panel
D. drag a Deform pin with the Control key (Windows) or Command key (Mac OS)
E. drag a Puppet Overlap pin with the Control key (Windows) or Command key (Mac OS)
Answer: D
Adobe인증 9A0-096 dumps 9A0-096인증 9A0-096인증 9A0-096시험문제
NO.10 You have opened a project and identified that the same footage appears multiple times in the Project
panel, and you wish to remove all duplicate footage items from the project.
What should you do?
A. choose File > Collect Files
B. choose File > Reduce Project
C. choose File > Consolidate All Footage
D. choose File > Remove Unused Footage
Answer: C
Adobe dumps 9A0-096 9A0-096 9A0-096 dumps
NO.11 When applying the Wiggle Paths path operator to a shape group on a Shape Layer, which option
controls how far a path is bent?
A. Size
B. Detail
C. Points
D. Correlation
E. Spatial Phase
Answer: A
Adobe 9A0-096 9A0-096 9A0-096 9A0-096 dumps
NO.12 You wish to create a text animation that will have the letters change color while letting the words
animate position, rotation, and scale.
Which option in the Timeline panel will let you create the text animation?
A. Advanced > Based On
B. Add > Selector > Range
C. Add > Selector > Wiggly
D. Add > Property > Character Offset
E. Add > Property > Per Character 3D
F. Add > Property > All Transform Properties
Answer: B
Adobe시험문제 9A0-096 pdf 9A0-096인증 9A0-096덤프 9A0-096 pdf
NO.13 Which two statements are true about the creation of a new Shape Layer? (Choose two.)
A. Fill and Stroke will default to transparent until you modify them.
B. Fill and Stroke properties are set to the last fill and stroke used.
C. Fill will always default to solid red, and Stroke to 3 pixel white solid line.
D. Fill will always default to transparent, and Stroke to 3 pixel white solid line.
E. Fill and Stroke properties are set according to the swatch buttons in the Tools panel.
Answer: BE
Adobe 9A0-096 dump 9A0-096기출문제 9A0-096 9A0-096
NO.14 You are interpolating between two keyframed mask shape paths by using the Smart Mask Interpolation
panel.
Which option in the Smart Mask Interpolation panel lets you control how Smart Mask Interpolation
matches vertices one keyframe to another keyframe?
A. Quality
B. Matching Method
C. First Vertices Match
D. Bending Resistance
E. Add Mask Shape Vertices
Answer: A
Adobe인증 9A0-096 dumps 9A0-096최신덤프 9A0-096
NO.15 Click the Exhibit button.
You create a Shape Layer, add a new path and draw an open-ended line with the Pen tool. You add a
stroke, set its width to 40 pixels, and set its Line Cap option to Projecting Cap.
What is the resulting effect to the ends of the stroke?
A. The stroke ends fade out to 0% opacity over 20 pixels on each end.
B. The stroke ends are rounded off with a 40 pixel diameter semicircle on each end.
C. The stroke ends are squared off at the exact points defining the start and finish of the path.
D. The stroke ends are squared off with an additional 20 pixels beyond the points defining the start and
finish of the path.
Answer: D
Adobe 9A0-096 9A0-096 9A0-096
NO.16 What is the purpose of the Random Seed option under the Advanced section of a type Range
Selector's properties?
A. to determine the speed of change between the Ease High and Ease Low values of the Range Selector
B. to randomize the order in which the animated property is applied to the characters specified by the
Range Selector
C. to calculate the order in which specific characters within that Range Selector are affected by the text
animator you apply
D. to determine the amount of time the animation takes to transition from one character to another, when
using the Square shape setting
Answer: C
Adobe 9A0-096 9A0-096기출문제
NO.17 When pasting a mask path from an After Effects layer into the Position property for an object in the
Timeline panel, the size of the resulting motion path needs to be a different size than the original mask
path.
Which action lets you resize the motion path?
A. apply the Free Transform Points command to the position keyframes
B. convert the roving keyframes created when pasting the path to the Position property into Bezier
keyframes
C. resize the mask path in a solid layer the size of the composition before pasting the path into the
Position property
D. set the Display > Motion Path section of After Effects Preferences to show all keyframes before pasting
the path into the Position property
Answer: C
Adobe 9A0-096 dump 9A0-096인증 9A0-096
NO.18 What should you do if you wish to apply an animated dashed Stroke effect to a Text Layer?
A. select the Text Layer and go to Layer > Effect > Stroke
B. go to Layer > Create Masks from Text, then select the resulting Shape Layer and go to Effect >
Generate > Stroke
C. go to Layer > Create Shapes from Text, then select the resulting Shape Layer and go to Effect >
Generate > Stroke
D. use the Character panel to define and apply the Stroke settings on the Text Layer, then animate the
Stroke properties in the timeline
Answer: B
Adobe 9A0-096 9A0-096기출문제 9A0-096
NO.19 A composition contains a Shape Layer containing four separate parametric shapes, each with different
fill and stroke attributes. You have grouped the four parametric shapes into one master group.
Which statement is true about the fill and stroke attributes the four parametric shapes will have in the
master group?
A. The parametric shapes will retain their original fill and stroke attributes.
B. Attributes of the top parametric shape in the Timeline panel will be applied.
C. Attributes of the bottom parametric shape in the Timeline panel will be applied.
D. Current attributes of the Fill and Stroke options in the Tool panel will be applied.
Answer: A
Adobe dumps 9A0-096 pdf 9A0-096자격증 9A0-096 9A0-096 dumps
NO.20 Which string do you need to type in the project's Quick Search field, to show footage items that are left
outside of the current project?
A. unused
B. missing
C. notshown
D. notpresent
Answer: A
Adobe인증 9A0-096자격증 9A0-096자료
NO.21 Which tool lets you change the point from which transformations happen to a layer in the Composition
panel, without changing the layer's appearance or position?
A. Selection tool
B. Puppet Pin tool
C. Pan Behind tool
D. Convert Vertex tool
E. Unified Camera tool
Answer: C
Adobe pdf 9A0-096 dumps 9A0-096자격증
NO.22 What should you do to apply permanent motion blur to a mask?
A. select the mask, then choose Layer > Mask > Motion Blur > On
B. select the mask, then choose Layer > Mask > Motion Blur > Same As Layer
C. select the mask, then click the Motion Blur switch for the layer in the timeline
D. select the mask, then click the Composition Motion Blur switch in the timeline
Answer: A
Adobe덤프 9A0-096 9A0-096최신덤프 9A0-096자격증 9A0-096 pdf 9A0-096기출문제
NO.23 You wish to animate a path to create a write-on effect.
Which path operator should you choose from the Add pulldown menu next to the shape layer in the
timeline?
A. Twist
B. Trim Paths
C. Offset Paths
D. Merge Paths
Answer: B
Adobe 9A0-096 dumps 9A0-096 9A0-096
NO.24 When working in an After Effects Composition panel, you need to lock the current composition viewer,
split the current frame, and create a new composition viewer in the frame.
Which action performs this function in the Composition panel?
A. choose Maximize Frame from the Composition panel menu
B. press Ctrl+Alt+Shift+N (Windows) or Command+Option+Shift+N (Mac OS) on the keyboard
C. lock the Composition panel and choose Maximize Frame from the Composition panel menu
D. Ctrl (Windows) or Command (Mac OS) drag the gripper area in the upper-left corner of the
Composition panel into the center of the work area
E. Ctrl (Windows) or Command (Mac OS) drag the group gripper in the upper-right corner of the
Composition panel into the center of the work area
Answer: B
Adobe pdf 9A0-096 9A0-096 dump
NO.25 Which statement is true about typing the string Anchor in the Quick Search option of the Timeline
panel when no layers are selected?
A. No Anchor Point properties will be revealed.
B. All Anchor Point properties for all layers will be revealed.
C. Only keyframed Anchor Point properties will be revealed.
D. Anchor Point properties for hidden layers will not be revealed.
Answer: B
Adobe 9A0-096기출문제 9A0-096
NO.26 You have formatted several letters on a Text Layer with the Character panel using the Fill Over Stroke
feature for some letters and the Stroke Over Fill feature for other letters.
Which setting in the Timeline panel preserves those features on the Type Layer when the All Fills Over All
Strokes option is selected from the Character panel?
A. Animate > Character Value
B. Fill & Stroke > Per Character panel
C. Inter-Character Blending > Overlay
D. Anchor Point Grouping > Character
E. Fill & Stroke > All Strokes Over All Fills
Answer: B
Adobe시험문제 9A0-096최신덤프 9A0-096 9A0-096 9A0-096자료
NO.27 You have created a Text Layer in a composition and have animated the Opacity property to create a
write on effect where the letters pop on without any transition in opacity. When previewing the composition,
you find that the text characters in the animation are gradually fading up instead of popping on.
Which options in the Timeline panel will you apply to remove the gradual fading up of the text characters
and have them pop on without a transition in opacity?
A. Shape > Square > Smoothness = 0
B. Shape > Ramp Up > Smoothness = 0
C. Shape > Square > Smoothness = 100
D. Shape > Ramp Up > Smoothness = 100
E. Shape > Ramp Down > Smoothness = 0
F. Shape > Ramp Down > Smoothness = 100
Answer: A
Adobe 9A0-096기출문제 9A0-096 9A0-096 dump
NO.28 You have applied the Bevel and Emboss layer style to several text layers in an After Effects
composition and have enabled the Use Global Light option.
Which two options in the Bevel and Emboss layer style will be overridden by enabling the Use Global
Light option? (Choose two.)
A. Size
B. Angle
C. Depth
D. Altitude
E. Direction
F. Technique
G. Shadow Mode
H. Highlight Mode
Answer: BD
Adobe dumps 9A0-096 9A0-096덤프
NO.29 Click the Exhibit button.
What should you do in order to create a different wiggle motion for each one of the star shape duplicates
of a single Shape Layer, that already has the Repeater operator applied?
A. add a Wiggle Paths operator before the Repeater operator, then open the Wiggle Paths settings and
adjust the Size value
B. add a Wiggle Paths operator after the Repeater operator, then open the Wiggle Paths settings and
adjust the Wiggles/Second value
C. add a Wiggle Transform operator after the Repeater operator, then open the Wiggle Transform settings
and adjust the Transform values
D. add a Wiggle Transform operator before the Repeater operator, then open the Wiggle Transform
settings and adjust the Transform values
Answer: C
Adobe기출문제 9A0-096자격증 9A0-096자격증
NO.30 You have applied Motion Blur to an animating mask shape.
Which option lets you control the amount of blurring to the mask as it animates?
A. Mask Feather
B. Mask Expansion
C. Layer > Masks > Motion Blur
D. Composition Settings > Advanced > Shutter Angle
E. Composition Settings > Advanced > Shutter Phase
Answer: D
Adobe 9A0-096최신덤프 9A0-096자격증 9A0-096자격증 9A0-096덤프 9A0-096자료
ITexamdump의 70-462덤프의 VCE테스트프로그램과 VCP-510덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 600-199시험에 대비한 고품질 덤프와 70-487시험 최신버전덤프를 제공해드립니다. 최고품질 C_TADM53_70시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기