ITExamDump 에서 출시한 제품 Oracle인증1Z0-242시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된Oracle인증1Z0-242덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.
Oracle 인증 1Z0-242시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
시험 번호/코드: 1Z0-242
시험 이름: Oracle (PeopleSoft Application Developer II: App Engine and Integration)
만약Oracle인증1Z0-242시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Oracle인증1Z0-242시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다
IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. Oracle인증1Z0-242시험준비중이신 분들은ITExamDump 에서 출시한Oracle인증1Z0-242 덤프를 선택하세요.
ITExamDump의 연구팀에서는Oracle 1Z0-242인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드Oracle 1Z0-242덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에Oracle 1Z0-242이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이Oracle 1Z0-242시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.
1Z0-242 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-242.html
NO.1 Evaluate this PeopleCode snippet.
Local Array of Number &MyArray;
Local Any &Len, &Result;
&MyArray = CreateArray(3);
&MyArray[1] = 100;
&MyArray[2] = 200;
&MyArray[3] = 300;
&Result = &MyArray.POP();
&Len = &MyArray.LEN;
&End = &MyArray[&Len];
What are the correct values for &Result and &End?
A. &Result is 300
&End is 200
B. &Result is 300
&End is Null
C. &Result is 300
&End is 300
D. &Result is Null
&End is 300
E. &Result is 100
&End is 300
Answer: A
Oracle 1Z0-242자료 1Z0-242 1Z0-242덤프
NO.2 Examine the join in this Select statement:
SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE A.TASK = B.TASK
AND A.RESOURCE = B.RESOURCE
Select the equivalent Select statement.
A. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(A.TASK, B.RESOURCE)
B. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Common(PROJECT A, EFFORT B)
C. SELECT A.TASK , B.EFFORT_AMT
FROM %Common(KEYS, PROJECT A, EFFORT B)
D. SELECT A.TASK , B.EFFORT_AMT
FROM PS_PROJECT A , PS_EFFORT B
WHERE %Join(COMMON_KEYS, TASK A, EFFORT_AMT B)
E. SELECT A.TASK , B.EFFORT_AMT
FROM %Join(COMMON_KEYS, PROJECT A, EFFORT B)
Answer: E
Oracle 1Z0-242 1Z0-242기출문제 1Z0-242 1Z0-242
NO.3 An Application Engine program inserts rows into PS_VENDOR.
The program encounters an error and abends (ends abnormally).
You correct the error, but now PS_VENDOR is in an unknown state.
Select the correct statement.
A. If Log File was enabled in Configuration Manager, a script file was created that you use to return the
database to its original state. After you correct the error, you can run the program again.
B. If Recover was enabled for the program, the changes to PS_VENDOR are rolled back. After you
correct the error, you can run the program again.
C. If Restart was enabled for the program, a checkpoint was saved with the last commit. After you correct
the error, you can restart the program and processing will resume from the point of the last commit.
D. If Resume was enabled in PeopleSoft Process Scheduler, the program automatically resumes
processing after the condition that caused the error is corrected.
E. If a state record was defined for the program, PS_VENDOR is restored based on parameters that were
written to the state record. Then you can restart the program using the same run control parameters.
Answer: C
Oracle pdf 1Z0-242 1Z0-242최신덤프
NO.4 The Get Student Enrollments page uses a PeopleCode program to select and display rows based on
user input. When the user clicks Refresh, FieldChange PeopleCode populates a stand-alone rowset
using a Select method. When you test the program, the new rows are appended to the previous rows
instead of replacing them. How do you fix this problem?
A. Use a work scroll instead of a stand-alone rowset.
B. Add &Rowset.Flush(); after the Select method.
C. Use an Update method instead of a Select method.
D. Add &Rowset.Flush(); before the Select method.
E. Add &Rowset.Refresh (); after the Select method.
F. Add &Rowset.Refresh(); before the Select method.
Answer: D
Oracle 1Z0-242 1Z0-242인증
NO.5 Select three Application Engine action types that can be used to control program flow. (Choose three.)
A. Log Message
B. Call Section
C. XSLT
D. PeopleCode
E. Do While
F. Evaluate
Answer: BDE
Oracle 1Z0-242시험문제 1Z0-242 1Z0-242 1Z0-242 1Z0-242
NO.6 How do you configure Process Scheduler to initiate an Application Engine trace for SQL and Step?
A. Add %%TRACE%% %%SQL%% %%STEP%% to the parameter list for the Process Type.
B. On the Run Control page, select the SQL Trace and Step Trace check boxes.
C. On the Process Monitor page, select the SQL Trace and Step Trace check boxes.
D. On the Process Definition Override Options page, for Parameter List, select Append and enter
-TRACE 3.
E. On the Process Definition Override Options page, for Parameter List, select Append and enter -TRACE
SQL STEP.
F. On the Process Definition Override Options page, for Parameter List, select Append and
enter %%TRACE%% %%SQL%% %%STEP%%.
Answer: D
Oracle덤프 1Z0-242 1Z0-242기출문제 1Z0-242 pdf
NO.7 View the Exhibit.
This run control page executes an Application Engine program that updates the Course table using the
parameters entered by a user.
In addition to the run control page, which three elements must be in place? (Choose three.)
A. A state record with fields to hold input parameters
B. Component variables to pass the input parameters
C. A data buffer object to retrieve the input parameters
D. Application Engine SQL to retrieve the input parameters
E. A PeopleCode record object to update the Course table
F. A Process Instance table to store run control parameters
G. A run control record with fields to store the input parameters
Answer: ADG
Oracle 1Z0-242 1Z0-242 1Z0-242
NO.8 An Application Engine program uses a Do Select action. What occurs when the Select statement is
executed?
A. Each row returned by the Select statement is stored in the state record. The Select statement
continues until no more rows are returned. Then, the control passes to the calling section.
B. All rows returned by the Select statement are stored in a cursor. Then, the control is passed to the
calling section.
C. All rows returned by the Select statement are stored in the state record. Then, the control is passed to
the next section in the program.
D. All rows returned by the Select statement are stored in a cursor. The first row is stored in the state
record. Then, the remaining actions in the step are processed sequentially. Thereafter, the control returns
to the Do Select to fetch another row, until no more rows are returned.
E. When a row is returned, the remaining steps in the section execute and control returns to the calling
step.
F. When a row is returned, it is stored in the state record. Then, the control is passed to the calling section.
Answer: D
Oracle 1Z0-242 1Z0-242 1Z0-242
NO.9 View the Exhibit.
A PeopleCode program at level 0 checks the values for Percent Available (PCT_AVAILABLE) at level 1.
Analyze this code snippet.
Local Rowset &RS_Level0, &RS_Level1;
Local Row &Row_Level0, &Row_Level1;
Local Record &Rec_TaskRsrc;
Local Field & Fld_PctAvail ;
&RS_Level0 = GetLevel0();
&Row_Level0 = &RS_Level0.GetRow(1);
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
&Row_Level1 = &RS_Level1.GetRow(1);
&Rec_TaskRsrc = &Row_Level1.GetRecord(Record.PSU_Task_RSRC);
&Fld_PctAvail = &Rec_TaskRsrc.GetField(Field.PCT_AVAILABLE);
&Pct = &Fld_PctAvail.Value;
Select the correct option.
A. The program will produce the expected results.
B. The program is missing a loop to process each row in the level 1 rowset.
C. The program is missing a loop to process each rowset in the level 1 row.
D. The program can be simplified to:
&Pct = &RS_Level0.PSU_Task_RSRC.PCT_AVAILABLE.Value;
E. This line of code is not needed:
&RS_Level1 = &Row_Level0.GetRowset(Scroll.PSU_TASK_RSRC);
F. The &RS_Level0 = GetLevel0(); function is missing the Level 0 scroll name.
Answer: B
Oracle 1Z0-242 1Z0-242시험문제 1Z0-242 1Z0-242
NO.10 You modify an Application Engine program to use parallel processing with temporary tables.
The Application Engine program includes this code snippet, which is part of a SQL statement that inserts
rows into a temporary table.
INSERT INTO PS_CRS_FULL_TMP
What changes do you need to make to the code so that the Application Engine program will implement
parallel processing properly?
A. No changes to the code are needed as long as the temporary table has been properly configured for
parallel processing.
B. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO PS_CRS_FULL_TMP so that the
meta-SQL resolves to the correct state record at run time.
C. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Table(CRS_FULL_TMP) so that
the system variables resolve to the correct syntax at run time.
D. Replace INSERT INTO PS_CRS_FULL_TMP with INSERT INTO %Table(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct temporary table instance at run time.
E. Replace INSERT INTO PS_CRS_FULL_TMP with %INSERT INTO %Temp(CRS_FULL_TMP) so that
the meta-SQL resolves to the correct syntax and temporary table instance at run time.
Answer: D
Oracle 1Z0-242인증 1Z0-242자격증 1Z0-242자격증
NO.11 You want to examine the component buffer for the Customer Orders (PSU_CUST_ORDER )
component. Which four steps are necessary? (Choose four.)
A. Start the PeopleCode Debugger and set a breakpoint.
B. Access the Structure view on the PSU_CUST_ORDER component.
C. In Application Designer, select Component Buffers.
D. Access the Customer Orders component in the browser and trigger the breakpoint. Return to
PeopleSoft Application Designer when the breakpoint triggers.
E. Open, or create, a PeopleCode program that will execute while Customer Orders is running in the
browser.
F. Drill down through the component hierarchy in the Structure view on the PSU_CUST_ORDER
component.
G. In Application Designer, select Debug, View Component Buffers.
Answer: ADEG
Oracle 1Z0-242 1Z0-242
NO.12 Here is a snippet of PeopleCode that uses the Fetch method of the SQL class.
&SQL = CreateSQL("Select EFFORT_AMT from PS_PSU_TASK_EFFORT where TASK= :1",
PSU_TASK_TBL.TASK);
&Var1 = &SQL.Fetch(&Var2);
Select the two correct statements. (Choose two.)
A. &Var2 specifies which row to fetch.
B. &Var2 specifies which field to fetch.
C. &Var1 is populated with TRUE if a row is fetched.
D. &Var1 is populated with the number of rows returned.
E. &Var2 is populated with EFFORT_AMT from the row fetched.
F. &Var1 is populated with EFFORT_AMT from the row fetched.
G. &Var1 is populated with EFFORT_AMT from the first row returned.
Answer: CE
Oracle pdf 1Z0-242시험문제 1Z0-242 pdf 1Z0-242 dumps
NO.13 You want to see exactly when a PeopleCode program fires in the context of the Component Processor
flow. Which two methods will work? (Choose two.)
A. Insert a Print() statement in the program.
B. Insert a WinMessage() statement in the program.
C. Insert a MessageCatalog() statement in the program.
D. Run the PeopleCode Debugger and insert a breakpoint on the program.
E. Run the PeopleCode Debugger and select Debug, View Component Buffers.
Answer: BD
Oracle 1Z0-242 dump 1Z0-242 1Z0-242기출문제 1Z0-242 dumps 1Z0-242
NO.14 You add a dynamic call to an Application Engine program following these steps:
1. Add the fields AE_APPLID and AE_SECTION to the state record if they are not already present.
2. Build the state record.
3. Verify that the state record is the default state record for the Application Engine program.
4. In a PeopleCode action, use a conditional test to populate the fields AE_APPLID and AE_SECTION
with an Application Engine program name and section name, respectively.
5. Following the PeopleCode action, add a Call Section action.
Select the correct statement.
A. The Application Engine program will execute as expected.
B. Step 2 is not needed for dynamic call.
C. Step 3 is not needed.
D. Add a step after step 5 to insert a SQL action that will use the values in the state record to populate the
Program and Section fields of the Application Engine Call Section action.
E. Add a step after step 5 to select the Dynamic Call check box in the Call Section action.
F. Step 4 is wrong. The PeopleCode program should use the AESection class to issue the dynamic call.
Answer: E
Oracle dump 1Z0-242최신덤프 1Z0-242 1Z0-242 1Z0-242 dump
NO.15 View the Exhibit.
Your client is upgrading its purchasing application to use object-oriented PeopleCode to incorporate the
benefits of application classes.
The PeopleCode for the Purchase Order application is now encapsulated in an Application Package
called PSU_PO. The assign_order_nbr function is now ORDER_NBR, a method of the ORDER class.
You are tasked with modifying this program to call the new ORDER_NBR method.
Which four PeopleCode statements will you use in the new program? (Choose four.)
A. Class PSU_PO:ORDER;
B. &New.ORDER_NBR(PSU_PO_HDR.ORDER_NBR);
C. Import PSU_PO:ORDER;
D. Declare method PSU_PO:ORDER:ORDER_NBR;
E. &New = Create Order();
F. Local ORDER &New;
G. Method ORDER_NBR (&ORDER_NBR As Field out);
Answer: BCEF
Oracle 1Z0-242 dump 1Z0-242 dump 1Z0-242최신덤프 1Z0-242
NO.16 View the Exhibit.
On the Employee Review page, you have a business rule with these requirements:
1. If Review Type is Supervisor, then the prompt for Reviewer ID returns only supervisors.
2. If Review Type is Peer or Performance, then the prompt for Reviewer ID returns all employees.
Select the three steps required to implement this business rule. (Choose three.)
A. Associate the REVIEWER_ID field with REVIEWER_VW.
B. Create REVIEWER_VW as a dynamic view of the EMPLOYEE table.
C. Add the DERIVED.EDITTABLE field to the page and make it invisible.
D. Set the prompt table edit for the REVIEWER_ID field to REVIEWER_VW.
E. Set the prompt table edit for the REVIEWER_ID field to DERIVED.%EDITTABLE.
F. Use a SQL Select statement in PeopleCode to populate the REVIEWER_VW view.
G. Use a conditional statement in PeopleCode to populate the DERIVED.EDITTABLE field.
Answer: CEG
Oracle 1Z0-242인증 1Z0-242 1Z0-242 1Z0-242 dumps 1Z0-242인증
NO.17 A Process Scheduler process is configured to run an Application Engine program. You need to modify
the process to use parameters entered by the user at run time. Which four additional steps do you need to
take? (Choose four.)
A. Create a process type for the new process.
B. Add bind variables to the command-line parameters.
C. Write a PeopleCode program to pass the parameters.
D. Create a state record with fields to pass input parameters.
E. Create a run control page with fields to enter the input parameters.
F. Create a run control record with fields to store the input parameters.
G. Modify the Application Engine program to retrieve the input parameters.
Answer: DEFG
Oracle 1Z0-242 1Z0-242최신덤프 1Z0-242
NO.18 View the Exhibit.
An object-oriented PeopleCode program traverses the data buffer to get the value for Session Number
(SESSION_NBR) in the Session Details record (PSU_CRS_SESSN) on the Course Sessions page.
The program uses a built-in function to instantiate the Level 0 object, then uses object methods to
instantiate the remaining data buffer objects.
Select the option that represents the order in which the program instantiates the data buffer objects.
A. &Row_Level0, &Row _Level1, &Record, &Field
B. &Rowset_Level0, &Row_Level1, &Record, &Field
C. &Rowset_Level0, &Rowset_Level1, &Row_Level1, &Record, &Field
D. &Rowset_Level0, &Row _Level0, &Rowset_Level1, &Row _Level1, &Record, &Field
Answer: D
Oracle 1Z0-242 1Z0-242 1Z0-242인증 1Z0-242 pdf
NO.19 The Customer Orders page uses data from the ITEM table to perform price calculations. You decide to
write a PeopleCode program to create a stand-alone rowset that will load data from the ITEM table into
the data buffer. Select three PeopleCode statements that can be used with stand-alone rowsets. (Choose
three.)
A. &RS_Item = GetRowSet(SCROLL.ITEM);
B. &RS_Item = CreateRowSet(RECORD.ITEM);
C. &Price = &RS_Item(&i).ITEM.PRICE.Value;
D. &RS_Item.Select("Where ITEM = :1", CUST_ORDER.ITEM);
E. &RS_Item.Fill("Where CUST_TYPE = :1", CUST_ORDER.TYPE);
F. &RS_Item = ScrollSelect(1,Scroll.ITEM, Record.ITEM, ("Where CUST_TYPE = :1", CUST_ORDER.
CUST_TYPE);
Answer: BCE
Oracle 1Z0-242최신덤프 1Z0-242 1Z0-242
NO.20 An Application Engine program requires a loop that will exit after 1000 rows have been processed.
The COUNTER field in the state record is incremented in each iteration of the loop. Which option contains
code that could be used in a Do While action to test for COUNTER?
A. Do While %Bind(Counter) < 1000
B. %SELECT (COUNTER)
FROM PS_INSTALLATION
Where COUNTER < 1000
C. If %Bind(Counter) >= 1000 then
Exit;
D. %Select(COUNTER)
FROM PS_STATE_AET
Where COUNTER < 1000
E. %Select(COUNTER)
SELECT 'X'
FROM PS_INSTALLATION
WHERE %Bind(COUNTER) < 1000;
Answer: E
Oracle 1Z0-242 dumps 1Z0-242
ITExamDump 의 학습가이드에는Oracle 1Z0-242인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. ITExamDump 을 선택하면 ITExamDump 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고Oracle 1Z0-242인증시험도 고득점으로 패스하게 해드릴 것입니다.
댓글 없음:
댓글 쓰기